Pricing
Garage floor coating prices
in Dallas Fort Worth, published
Garage floor coating prices in Dallas Fort Worth run $6 to $10 per square foot installed. A 2-car garage of about 440 square feet costs $2,650 on the entry build and $4,400 on the premium build, including diamond grinding, crack and joint repair, full flake broadcast and a polyaspartic topcoat.
Most 2-car garages: $2,650 to $3,200 installed
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Lifetime residential garage coating warranty
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Luke Miller / Pexels
Flake systems
Three builds
The only thing that changes between these is how many layers of protection sit between your tires and the concrete. Crack and joint repair is in all three.
Slabbr One
A real coating at the price most companies charge for paint
$6per sq ft installed
5 layersabout $2,650 for a 2-car garage
- 1
Diamond grind and profile
Mechanical profiling with diamond tooling and HEPA extraction. We do not acid etch, ever.
- 2
Crack and joint repair
Every crack chased, filled with a rigid repair polymer and ground flush before coating.
- 3
Polyaspartic base coat
A polyaspartic body coat that fills the profile and locks into the slab. UV stable from the first layer up.
- 4
Full flake broadcast
Vinyl flake thrown to refusal until no base color shows through. 700 plus blends.
- 5
Polyaspartic topcoat
UV stable, chemical resistant, and hard enough to shrug off hot tire pickup.
Right for
Rental properties, garages that stay dry and shaded, and anyone who wants the floor sealed properly without paying for armor they will not use.
Slabbr Prime
Most installedThe build we put in our own garages
$8per sq ft installed
6 layersabout $3,520 for a 2-car garage
- 1
Diamond grind and profile
Mechanical profiling with diamond tooling and HEPA extraction. We do not acid etch, ever.
- 2
Crack and joint repair
Every crack chased, filled with a rigid repair polymer and ground flush before coating.
- 3
Moisture vapor barrier primer
A penetrating primer that stops vapor drive coming up through the slab. Moisture is the number one reason cheap coatings let go.
- 4
Polyaspartic base coat
High elongation, so it moves with the slab instead of fighting it, and it bonds deeper than epoxy does.
- 5
Full flake broadcast
Vinyl flake thrown to refusal until no base color shows through. 700 plus blends.
- 6
Polyaspartic topcoat
UV stable, chemical resistant, and hard enough to shrug off hot tire pickup.
Right for
Any Texas garage that sees daily driving, summer slab temperatures, or a slab poured on ground that moves. This is the default for a reason.
Slabbr Ironclad
Everything we know how to do, in one floor
$10per sq ft installed
7 layersabout $4,400 for a 2-car garage
- 1
Diamond grind and profile
Mechanical profiling with diamond tooling and HEPA extraction. We do not acid etch, ever.
- 2
Crack and joint repair
Every crack chased, filled with a rigid repair polymer and ground flush before coating.
- 3
Moisture vapor barrier primer
A penetrating primer that stops vapor drive coming up through the slab.
- 4
Polyaspartic base coat
The same UV stable, high elongation chemistry as the topcoats. Polyaspartic top to bottom, not epoxy wearing a polyaspartic hat.
- 5
Full flake broadcast
Vinyl flake thrown to refusal until no base color shows through. 700 plus blends.
- 6
Polyaspartic topcoat, first pass
The working wear layer that takes the abuse.
- 7
Polyaspartic topcoat, second pass
A second full coat for depth of gloss and a wear layer thick enough to outlive the mortgage.
Right for
Shops, lifts, wrenching bays, four car garages, and homeowners who intend to never think about this floor again.
By garage size
What each build costs at each size
| Size | Slabbr One$6/sq ft | Slabbr Prime$8/sq ft | Slabbr Ironclad$10/sq ft |
|---|---|---|---|
| 1 carAbout 250 sq ft | $1,500 | $2,000 | $2,500 |
| 2 carAbout 440 sq ft. The most common garage in Texas. | $2,640 | $3,520 | $4,400 |
| 3 carAbout 660 sq ft | $3,960 | $5,280 | $6,600 |
| 4 car or shopAbout 900 sq ft and up | $5,400 | $7,200 | $9,000 |
Other systems
Everything else, per square foot
Metallic polyaspartic
$12per sq ft
Hand-worked, one of a kind. No two floors come out the same.
Quartz broadcast
$10per sq ft
Maximum slip resistance and texture. The right answer around water.
Solid color
$6per sq ft
Clean and uniform. Hundreds of colors, no flake.
Stained and sealed
$4per sq ft
Works the concrete you already have instead of covering it.
Polished concrete
$7 to $12per sq ft
Mechanically ground and densified to a gloss. No coating to fail.
Commercial and industrial
$4 to $12per sq ft
Priced by system build, slab condition and total square footage. Volume pricing past 2,000 sq ft.
What moves the price
Line items that genuinely change our cost
- Existing coating removal
- Old epoxy, paint or a peeling DIY kit has to come up before anything goes down.
- $1.75 per sq ft
- Stem walls
- Carries the finish up the foundation wall for a finished edge instead of a raw concrete lip.
- $240
- Entry step
- The step into the house, coated to match the floor.
- $120
- Anti-slip additive
- Texture blended into the topcoat. Standard on anything that gets wet.
- $175
That is the complete list. There is nothing else that appears on install day, because we measure the slab and test it before we give you a written number.
Straight answers
Questions about price
How much does a garage floor coating cost in Dallas Fort Worth?
$6 to $10 per square foot installed. A 440 square foot 2-car garage is $2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad. Every build includes diamond grinding, crack and joint repair, full flake broadcast and a polyaspartic topcoat.
What is the difference between the three builds?
One is a full polyaspartic system at $6 per square foot. Prime at $8 adds a moisture vapor barrier primer under the coating. Ironclad at $10 adds further build thickness. The layer that decides whether a floor lasts twenty years is the primer, which is why most garages get Prime.
Is crack repair extra?
No. Every crack is chased out, filled with a rigid repair polymer and ground flush before coating, and that is included in all three build prices. It is not quoted as an extra once the crew is standing on your slab.
What costs extra?
Removing a failed existing coating adds $1.50 per square foot. Special order flake blends outside the ten stocked colors carry a lead time and a surcharge, both published on the colors page. Nothing else is added after the quote.
Do you need to visit before quoting a residential floor?
No. Pick the surface, pick the size and the price is on screen. Residential pricing is per square foot against published rates, so a home visit adds nothing to the number. Commercial work is bid after a free site walk because slab condition varies more.
Is the price different in different cities?
No. The rate is the same in all 111 cities we serve, run out of the Celina and Burleson shops. There is no travel premium and we do not quote higher in the zip codes with more expensive houses.
How is a 2-car garage measured?
About 440 square feet in North Texas, which is the figure behind every 2-car price we publish. Larger garages, RV bays and shop slabs are priced off actual measured square footage at the same per foot rate.
Why do other companies not publish prices?
Because a number on a website cannot be adjusted once a salesperson is in your garage. We publish because the alternative is asking you to book an appointment to find out whether you can afford us.
Do you charge for the quote?
No. Residential pricing is instant and free. A commercial site walk is also free, and it produces a firm bid rather than a range.
Does the price include the warranty?
Yes, on every build. Interior residential floors carry a lifetime warranty against delamination, peeling and flaking for as long as you own the home. Exterior work carries 10 years, commercial 2 years. There is nothing to register and no extra tier to buy.
What does commercial work cost?
Commercial systems run from $4 to $14 per square foot depending on the system and the slab, quoted as a firm bid after a free site walk. Warehouse, auto shop, kitchen and hangar floors each price differently, and each rate is published on its own page.
Is financing available?
We publish cash prices only. We do not run financing, we do not add a finance markup to the sticker, and the number you see is the number you pay.
What we guarantee, in writing: the warranty.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it.