Tarrant County, Texas
Epoxy Flooring Alternative in Bedford, TX
Epoxy Flooring in Bedford, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. We are 30 minutes from Bedford, running out of our shop in Burleson.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Bedford; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
30 minutes from the shop
Epoxy on Bedford slabs
In Bedford this is the polyaspartic answer to epoxy. Housing here is concentrated 1972-1988 build-out, making Bedford one of the most uniformly middle-aged housing stocks in Tarrant County, and garages are two-car attached front-entry, commonly 19 to 20 feet deep, which limits full-size truck fit, so that is the slab we are quoting against. Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere. That is the honest limit of epoxy flooring in Bedford, and we would rather say it here than on install day.
- Drive time from our shop
- 30 minutes
- Distance
- 26 miles
- Burleson shop
- (817) 381-9385
- County
- Tarrant County
- ZIP codes served
- 76021, 76022
Service coverage in Bedford: Bedford Meadows, Oakmont, Stonegate, Rustic Woods, Timber View Estates, Brookwood Hills, Village of Oak Park.
Everything we install in Bedford, TX →Bedford pricing
What a Bedford floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Bedford. Same price as at the shop. We are 30 minutes from Bedford, running out of our shop in Burleson. All three builds compared, layer by layer.
The spec
What you are buying in Bedford
- Epoxy cure to vehicles
- 5 to 7 days. Our polyaspartic: 72 hours
- Epoxy under UV
- Ambers. Polyaspartic holds its color
- Epoxy under hot tires
- Softens and lifts. Polyaspartic does not
- What we install
- 100 percent polyaspartic, base to topcoat
When this is the wrong call
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
Straight answers
Epoxy Flooring in Bedford: common questions
How much does epoxy flooring cost in Bedford?
Epoxy Flooring costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does epoxy flooring involve in Bedford?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is epoxy flooring the wrong choice in Bedford?
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
What does the epoxy flooring specification include in Bedford?
Epoxy cure to vehicles: 5 to 7 days. Our polyaspartic: 72 hours. Epoxy under UV: Ambers. Polyaspartic holds its color. Epoxy under hot tires: Softens and lifts. Polyaspartic does not. What we install: 100 percent polyaspartic, base to topcoat.
Who is epoxy flooring best for in Bedford?
Anyone shopping epoxy quotes who wants the floor to last; Budget-conscious builds; Commercial spaces with forklift and pallet traffic. Slabbr assesses your surface and intended use before confirming the service.
How long does epoxy flooring take in Bedford?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is epoxy flooring warrantied in Bedford?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for epoxy flooring in Bedford?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with epoxy flooring in Bedford?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Bedford?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is epoxy flooring available in Bedford?
Slabbr serves Bedford, including Bedford Meadows, Oakmont, Stonegate. ZIP codes in our service area include 76021, 76022. Contact our Burleson team to confirm your address and appointment.
Who do I call about epoxy flooring in Bedford?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Bedford address, approximate area and photos so we can review the epoxy flooring scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Bedford.