Skip to content

TODAY ONLY: Save $250 when you call or get your quote by text

Ends midnight CT

Call (903) 243-9525
Slabbr

Wise County, Texas

Epoxy Flooring Alternative in Decatur, TX

Epoxy Flooring in Decatur, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. We are 55 minutes from Decatur, running out of our shop in Burleson.

$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Decatur; final scope after assessment

  • Coating preparation: diamond ground, never acid etched
  • Most garage coatings: one day install, park after 72 hours
  • Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
  • Written fixed price, no sales visit needed

See your price

Two taps gets you the number. Nobody asks who you are first.

About 440 sq ft. The most common garage in Texas.. No sales visit required to see the number.

Photo: Max Vakhtbovych / Pexels

55 minutes from the shop

Epoxy on Decatur slabs

In Decatur this is the polyaspartic answer to epoxy. Housing here is a Victorian-era core around the square with 1970s-90s additions and new builder product arriving since 2021, and garages are detached garages and shops in the older sections, two-car attached in the new subdivisions, so that is the slab we are quoting against. Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere. That is the honest limit of epoxy flooring in Decatur, and we would rather say it here than on install day.

Drive time from our shop
55 minutes
Distance
48 miles
Burleson shop
(817) 381-9385
County
Wise County
ZIP codes served
76234

Service coverage in Decatur: Vista Park, Hillview Addition, Prairie Vista Estates, Courthouse square district.

Everything we install in Decatur, TX →

Decatur pricing

What a Decatur floor costs

$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Decatur. Same price as at the shop. We are 55 minutes from Decatur, running out of our shop in Burleson. All three builds compared, layer by layer.

The spec

What you are buying in Decatur

Epoxy cure to vehicles
5 to 7 days. Our polyaspartic: 72 hours
Epoxy under UV
Ambers. Polyaspartic holds its color
Epoxy under hot tires
Softens and lifts. Polyaspartic does not
What we install
100 percent polyaspartic, base to topcoat

When this is the wrong call

Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.

Straight answers

Epoxy Flooring in Decatur: common questions

How much does epoxy flooring cost in Decatur?

Epoxy Flooring costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.

What does epoxy flooring involve in Decatur?

Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.

When is epoxy flooring the wrong choice in Decatur?

Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.

What does the epoxy flooring specification include in Decatur?

Epoxy cure to vehicles: 5 to 7 days. Our polyaspartic: 72 hours. Epoxy under UV: Ambers. Polyaspartic holds its color. Epoxy under hot tires: Softens and lifts. Polyaspartic does not. What we install: 100 percent polyaspartic, base to topcoat.

Who is epoxy flooring best for in Decatur?

Anyone shopping epoxy quotes who wants the floor to last; Budget-conscious builds; Commercial spaces with forklift and pallet traffic. Slabbr assesses your surface and intended use before confirming the service.

How long does epoxy flooring take in Decatur?

Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.

Is epoxy flooring warrantied in Decatur?

Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.

Do you use epoxy for epoxy flooring in Decatur?

No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.

Can you replace an existing coating with epoxy flooring in Decatur?

Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.

Which garage coating builds are available in Decatur?

Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.

Where is epoxy flooring available in Decatur?

Slabbr serves Decatur, including Vista Park, Hillview Addition, Prairie Vista Estates. ZIP codes in our service area include 76234. Contact our Burleson team to confirm your address and appointment.

Who do I call about epoxy flooring in Decatur?

Contact Slabbr's Burleson team at (817) 381-9385. Send your Decatur address, approximate area and photos so we can review the epoxy flooring scope.

See your number in about a minute

Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Decatur.

Call now