Cooke County, Texas
Epoxy Flooring Alternative in Gainesville, TX
Epoxy Flooring in Gainesville, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. We are 65 minutes from Gainesville, running out of our shop in Celina.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Gainesville; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
65 minutes from the shop
Epoxy on Gainesville slabs
In Gainesville this is the polyaspartic answer to epoxy. Housing here is an 1850s-founded core with Victorian and Italianate houses in South Gainesville around the 1912 Beaux-Arts courthouse, a large mid-century ranch belt, and newer subdivisions pushing toward I-35, and garages are split three ways: detached rear and alley garages, carriage-house conversions and porte-cocheres in the South Gainesville historic blocks, single- and two-car attached through the mid-century belt, and metal shops out at Oak Creek Ranchettes, so that is the slab we are quoting against. Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere. That is the honest limit of epoxy flooring in Gainesville, and we would rather say it here than on install day.
- Drive time from our shop
- 65 minutes
- Distance
- 39 miles
- Celina shop
- (903) 243-9525
- County
- Cooke County
- ZIP codes served
- 76240
Service coverage in Gainesville: South Gainesville historic homes, courthouse square, Rex Estates, Oak Creek Ranchettes, Fairgrounds, Liberty Pointe.
Everything we install in Gainesville, TX →Gainesville pricing
What a Gainesville floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Gainesville. Same price as at the shop. We are 65 minutes from Gainesville, running out of our shop in Celina. All three builds compared, layer by layer.
The spec
What you are buying in Gainesville
- Epoxy cure to vehicles
- 5 to 7 days. Our polyaspartic: 72 hours
- Epoxy under UV
- Ambers. Polyaspartic holds its color
- Epoxy under hot tires
- Softens and lifts. Polyaspartic does not
- What we install
- 100 percent polyaspartic, base to topcoat
When this is the wrong call
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
Straight answers
Epoxy Flooring in Gainesville: common questions
How much does epoxy flooring cost in Gainesville?
Epoxy Flooring costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does epoxy flooring involve in Gainesville?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is epoxy flooring the wrong choice in Gainesville?
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
What does the epoxy flooring specification include in Gainesville?
Epoxy cure to vehicles: 5 to 7 days. Our polyaspartic: 72 hours. Epoxy under UV: Ambers. Polyaspartic holds its color. Epoxy under hot tires: Softens and lifts. Polyaspartic does not. What we install: 100 percent polyaspartic, base to topcoat.
Who is epoxy flooring best for in Gainesville?
Anyone shopping epoxy quotes who wants the floor to last; Budget-conscious builds; Commercial spaces with forklift and pallet traffic. Slabbr assesses your surface and intended use before confirming the service.
How long does epoxy flooring take in Gainesville?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is epoxy flooring warrantied in Gainesville?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for epoxy flooring in Gainesville?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with epoxy flooring in Gainesville?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Gainesville?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is epoxy flooring available in Gainesville?
Slabbr serves Gainesville, including South Gainesville historic homes, courthouse square, Rex Estates. ZIP codes in our service area include 76240. Contact our Celina team to confirm your address and appointment.
Who do I call about epoxy flooring in Gainesville?
Contact Slabbr's Celina team at (903) 243-9525. Send your Gainesville address, approximate area and photos so we can review the epoxy flooring scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Gainesville.