Dallas County, Texas
Epoxy Flooring Alternative in Irving, TX
Epoxy Flooring in Irving, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. We are 35 minutes from Irving, running out of our shop in Burleson.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Irving; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
35 minutes from the shop
Epoxy on Irving slabs
In Irving this is the polyaspartic answer to epoxy. Housing here is 1950s-60s in south Irving around Plymouth Park, 1980s in Valley Ranch, and continuous mixed-use construction in Las Colinas since, and garages are single-car attached common in south Irving, two-car rear-entry in Valley Ranch, structured parking in Las Colinas, so that is the slab we are quoting against. Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere. That is the honest limit of epoxy flooring in Irving, and we would rather say it here than on install day.
- Drive time from our shop
- 35 minutes
- Distance
- 30 miles
- Burleson shop
- (817) 381-9385
- County
- Dallas County
- ZIP codes served
- 75038, 75039, 75060, 75061, 75062, 75063
Service coverage in Irving: Las Colinas, Valley Ranch, Plymouth Park, Estancia, Hardrock Estates, Towne Lake Estates, Riverwalk.
Everything we install in Irving, TX →Irving pricing
What a Irving floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Irving. Same price as at the shop. We are 35 minutes from Irving, running out of our shop in Burleson. All three builds compared, layer by layer.
The spec
What you are buying in Irving
- Epoxy cure to vehicles
- 5 to 7 days. Our polyaspartic: 72 hours
- Epoxy under UV
- Ambers. Polyaspartic holds its color
- Epoxy under hot tires
- Softens and lifts. Polyaspartic does not
- What we install
- 100 percent polyaspartic, base to topcoat
When this is the wrong call
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
Straight answers
Epoxy Flooring in Irving: common questions
How much does epoxy flooring cost in Irving?
Epoxy Flooring costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does epoxy flooring involve in Irving?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is epoxy flooring the wrong choice in Irving?
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
What does the epoxy flooring specification include in Irving?
Epoxy cure to vehicles: 5 to 7 days. Our polyaspartic: 72 hours. Epoxy under UV: Ambers. Polyaspartic holds its color. Epoxy under hot tires: Softens and lifts. Polyaspartic does not. What we install: 100 percent polyaspartic, base to topcoat.
Who is epoxy flooring best for in Irving?
Anyone shopping epoxy quotes who wants the floor to last; Budget-conscious builds; Commercial spaces with forklift and pallet traffic. Slabbr assesses your surface and intended use before confirming the service.
How long does epoxy flooring take in Irving?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is epoxy flooring warrantied in Irving?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for epoxy flooring in Irving?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with epoxy flooring in Irving?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Irving?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is epoxy flooring available in Irving?
Slabbr serves Irving, including Las Colinas, Valley Ranch, Plymouth Park. ZIP codes in our service area include 75038, 75039, 75060, 75061, 75062, 75063. Contact our Burleson team to confirm your address and appointment.
Who do I call about epoxy flooring in Irving?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Irving address, approximate area and photos so we can review the epoxy flooring scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Irving.