Dallas County, Texas
Epoxy Flooring Alternative in Lancaster, TX
Epoxy Flooring in Lancaster, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. Lancaster sits about 34 miles from the Burleson shop, roughly 38 minutes with a trailer.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Lancaster; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
38 minutes from the shop
Epoxy on Lancaster slabs
In Lancaster this is the polyaspartic answer to epoxy. Housing here is a preserved Victorian-era town square with 1970s-80s subdivisions and renewed builder activity since 2015, and garages are two-car attached front-entry, with detached garages behind the older homes near the square, so that is the slab we are quoting against. Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere. That is the honest limit of epoxy flooring in Lancaster, and we would rather say it here than on install day.
- Drive time from our shop
- 38 minutes
- Distance
- 34 miles
- Burleson shop
- (817) 381-9385
- County
- Dallas County
- ZIP codes served
- 75134, 75146
Service coverage in Lancaster: Bear Creek Ranch, Meadowlands, Millbrook East, Ten Mile Creek Estates, Pecan Grove Estates, Clover Meadow, Western Hills.
Everything we install in Lancaster, TX →Lancaster pricing
What a Lancaster floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Lancaster. Same price as at the shop. Lancaster sits about 34 miles from the Burleson shop, roughly 38 minutes with a trailer. All three builds compared, layer by layer.
The spec
What you are buying in Lancaster
- Epoxy cure to vehicles
- 5 to 7 days. Our polyaspartic: 72 hours
- Epoxy under UV
- Ambers. Polyaspartic holds its color
- Epoxy under hot tires
- Softens and lifts. Polyaspartic does not
- What we install
- 100 percent polyaspartic, base to topcoat
When this is the wrong call
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
Straight answers
Epoxy Flooring in Lancaster: common questions
How much does epoxy flooring cost in Lancaster?
Epoxy Flooring costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does epoxy flooring involve in Lancaster?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is epoxy flooring the wrong choice in Lancaster?
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
What does the epoxy flooring specification include in Lancaster?
Epoxy cure to vehicles: 5 to 7 days. Our polyaspartic: 72 hours. Epoxy under UV: Ambers. Polyaspartic holds its color. Epoxy under hot tires: Softens and lifts. Polyaspartic does not. What we install: 100 percent polyaspartic, base to topcoat.
Who is epoxy flooring best for in Lancaster?
Anyone shopping epoxy quotes who wants the floor to last; Budget-conscious builds; Commercial spaces with forklift and pallet traffic. Slabbr assesses your surface and intended use before confirming the service.
How long does epoxy flooring take in Lancaster?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is epoxy flooring warrantied in Lancaster?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for epoxy flooring in Lancaster?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with epoxy flooring in Lancaster?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Lancaster?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is epoxy flooring available in Lancaster?
Slabbr serves Lancaster, including Bear Creek Ranch, Meadowlands, Millbrook East. ZIP codes in our service area include 75134, 75146. Contact our Burleson team to confirm your address and appointment.
Who do I call about epoxy flooring in Lancaster?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Lancaster address, approximate area and photos so we can review the epoxy flooring scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Lancaster.