Denton County, Texas
Metallic Epoxy Floor Alternative in Pilot Point, TX
Metallic Epoxy Floors in Pilot Point, TX costs $12 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Pilot Point sits about 14 miles from the Celina shop, roughly 30 minutes with a trailer.
$12 per square foot in Pilot Point; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Diana ✨ / Pexels
30 minutes from the shop
Metallic on Pilot Point slabs
In Pilot Point this is decorative metallic floors. Housing here is an 1870s downtown square with limited 1990s growth and a fresh wave of subdivisions since 2020, and garages are detached garages and stables on the horse properties, two-car attached in the newer subdivisions, so that is the slab we are quoting against. Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today. That is the honest limit of metallic epoxy floors in Pilot Point, and we would rather say it here than on install day.
- Drive time from our shop
- 30 minutes
- Distance
- 14 miles
- Celina shop
- (903) 243-9525
- County
- Denton County
- ZIP codes served
- 76258
Service coverage in Pilot Point: Timberlake Trails, Twin Creeks Ranch, High Point Estates, Butterfield Junction, Yellow Rose Estates, Pecan Creek Acres.
Everything we install in Pilot Point, TX →The spec
What you are buying in Pilot Point
- Install time
- Two days for most residential spaces
- Finish
- High gloss, one of a kind
- Repeatability
- None. Every floor is unique by design
- Topcoat
- Polyaspartic wear layer over the metallic
When this is the wrong call
Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today.
Straight answers
Metallic Epoxy Floors in Pilot Point: common questions
How much does metallic epoxy floors cost in Pilot Point?
Metallic Epoxy Floors costs $12 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does metallic epoxy floors involve in Pilot Point?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is metallic epoxy floors the wrong choice in Pilot Point?
Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today.
What does the metallic epoxy floors specification include in Pilot Point?
Install time: Two days for most residential spaces. Finish: High gloss, one of a kind. Repeatability: None. Every floor is unique by design. Topcoat: Polyaspartic wear layer over the metallic.
Who is metallic epoxy floors best for in Pilot Point?
Showrooms and retail; Basements and finished interiors; Garages built to be looked at; Entryways and lobbies. Slabbr assesses your surface and intended use before confirming the service.
How long does metallic epoxy floors take in Pilot Point?
Install time: Two days for most residential spaces. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is metallic epoxy floors warrantied in Pilot Point?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for metallic epoxy floors in Pilot Point?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with metallic epoxy floors in Pilot Point?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is metallic epoxy floors available in Pilot Point?
Slabbr serves Pilot Point, including Timberlake Trails, Twin Creeks Ranch, High Point Estates. ZIP codes in our service area include 76258. Contact our Celina team to confirm your address and appointment.
Who do I call about metallic epoxy floors in Pilot Point?
Contact Slabbr's Celina team at (903) 243-9525. Send your Pilot Point address, approximate area and photos so we can review the metallic epoxy floors scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Pilot Point.