Ellis County, Texas
Polyaspartic Garage Floor Coating in Ennis, TX
Polyaspartic Garage Floor Coating in Ennis, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. Ennis sits about 45 miles from the Burleson shop, roughly 50 minutes with a trailer.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Ennis; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Jae Park / Pexels
50 minutes from the shop
Polyaspartic on Ennis slabs
In Ennis this is the full polyaspartic build. Housing here is early-1900s farmhouses near downtown, a heavy mid-century ranch stock, and new construction arriving since 2022, and garages are detached rear garages downtown, two-car attached in the mid-century and newer subdivisions, so that is the slab we are quoting against. Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it. That is the honest limit of polyaspartic garage floor coating in Ennis, and we would rather say it here than on install day.
- Drive time from our shop
- 50 minutes
- Distance
- 45 miles
- Burleson shop
- (817) 381-9385
- County
- Ellis County
- ZIP codes served
- 75119
Service coverage in Ennis: Prairie View Watermill, Cardinal, Bristol, Lake Bardwell area.
Everything we install in Ennis, TX →Ennis pricing
What a Ennis floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Ennis. Same price as at the shop. Ennis sits about 45 miles from the Burleson shop, roughly 50 minutes with a trailer. All three builds compared, layer by layer.
The spec
What you are buying in Ennis
- Cure to foot traffic
- A few hours
- Cure to vehicle traffic
- 72 hours
- UV stability
- Will not amber or yellow
- Hot tire pickup
- Fully resistant
- Expected life
- 20 years plus
When this is the wrong call
Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.
Straight answers
Polyaspartic Garage Floor Coating in Ennis: common questions
How much does polyaspartic garage floor coating cost in Ennis?
Polyaspartic Garage Floor Coating costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does polyaspartic garage floor coating involve in Ennis?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is polyaspartic garage floor coating the wrong choice in Ennis?
Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.
What does the polyaspartic garage floor coating specification include in Ennis?
Cure to foot traffic: A few hours. Cure to vehicle traffic: 72 hours. UV stability: Will not amber or yellow. Hot tire pickup: Fully resistant. Expected life: 20 years plus.
Who is polyaspartic garage floor coating best for in Ennis?
West and south facing garages that bake; Anyone who parks a car in hot after a summer drive; Fast turnarounds where the garage cannot sit for a week. Slabbr assesses your surface and intended use before confirming the service.
How long does polyaspartic garage floor coating take in Ennis?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is polyaspartic garage floor coating warrantied in Ennis?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for polyaspartic garage floor coating in Ennis?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with polyaspartic garage floor coating in Ennis?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Ennis?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is polyaspartic garage floor coating available in Ennis?
Slabbr serves Ennis, including Prairie View Watermill, Cardinal, Bristol. ZIP codes in our service area include 75119. Contact our Burleson team to confirm your address and appointment.
Who do I call about polyaspartic garage floor coating in Ennis?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Ennis address, approximate area and photos so we can review the polyaspartic garage floor coating scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Ennis.
