Tarrant County, Texas
Polyaspartic Garage Floor Coating in Keller, TX
Polyaspartic Garage Floor Coating in Keller, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. Keller sits about 29 miles from the Burleson shop, roughly 32 minutes with a trailer.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Keller; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Jae Park / Pexels
32 minutes from the shop
Polyaspartic on Keller slabs
In Keller this is the full polyaspartic build. Housing here is concentrated 1994-2008 construction on quarter to half-acre lots, leaving very little vacant land, and garages are three-car garages are very common, frequently side-entry on the larger 1990s lots, so that is the slab we are quoting against. Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it. That is the honest limit of polyaspartic garage floor coating in Keller, and we would rather say it here than on install day.
- Drive time from our shop
- 32 minutes
- Distance
- 29 miles
- Burleson shop
- (817) 381-9385
- County
- Tarrant County
- ZIP codes served
- 76248, 76262
Service coverage in Keller: Hidden Lakes, Marshall Ridge, Bursey Ranch, Estates of Oak Run, Cross Timbers, Saddlebrook Estates, The Lakes.
Everything we install in Keller, TX →Keller pricing
What a Keller floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Keller. Same price as at the shop. Keller sits about 29 miles from the Burleson shop, roughly 32 minutes with a trailer. All three builds compared, layer by layer.
The spec
What you are buying in Keller
- Cure to foot traffic
- A few hours
- Cure to vehicle traffic
- 72 hours
- UV stability
- Will not amber or yellow
- Hot tire pickup
- Fully resistant
- Expected life
- 20 years plus
When this is the wrong call
Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.
Straight answers
Polyaspartic Garage Floor Coating in Keller: common questions
How much does polyaspartic garage floor coating cost in Keller?
Polyaspartic Garage Floor Coating costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does polyaspartic garage floor coating involve in Keller?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is polyaspartic garage floor coating the wrong choice in Keller?
Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.
What does the polyaspartic garage floor coating specification include in Keller?
Cure to foot traffic: A few hours. Cure to vehicle traffic: 72 hours. UV stability: Will not amber or yellow. Hot tire pickup: Fully resistant. Expected life: 20 years plus.
Who is polyaspartic garage floor coating best for in Keller?
West and south facing garages that bake; Anyone who parks a car in hot after a summer drive; Fast turnarounds where the garage cannot sit for a week. Slabbr assesses your surface and intended use before confirming the service.
How long does polyaspartic garage floor coating take in Keller?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is polyaspartic garage floor coating warrantied in Keller?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for polyaspartic garage floor coating in Keller?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with polyaspartic garage floor coating in Keller?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Keller?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is polyaspartic garage floor coating available in Keller?
Slabbr serves Keller, including Hidden Lakes, Marshall Ridge, Bursey Ranch. ZIP codes in our service area include 76248, 76262. Contact our Burleson team to confirm your address and appointment.
Who do I call about polyaspartic garage floor coating in Keller?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Keller address, approximate area and photos so we can review the polyaspartic garage floor coating scope.
Polyaspartic nearby
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Keller.