Skip to content

TODAY ONLY: Save $250 when you call or get your quote by text

Ends midnight CT

Call (903) 243-9525
Slabbr

Dallas County, Texas

Polyaspartic Garage Floor Coating in Richardson, TX

Polyaspartic Garage Floor Coating in Richardson, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. Contact Slabbr's Burleson team at (817) 381-9385 to confirm the job address, access and appointment. A city listing is not an arrival-time guarantee.

$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Richardson; final scope after assessment

  • Coating preparation: diamond ground, never acid etched
  • Most garage coatings: one day install, park after 72 hours
  • Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
  • Written fixed price, no sales visit needed

See your price

Two taps gets you the number. Nobody asks who you are first.

About 440 sq ft. The most common garage in Texas.. No sales visit required to see the number.

Photo: Jae Park / Pexels

Your Burleson contact

Polyaspartic on Richardson slabs

Polyaspartic Garage Floor Coating in Richardson starts with the actual property and intended use. Record the existing finish, visible cracks, moisture history and desired appearance. Include door thresholds and any storage that must be removed before work starts. Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it. Contact the Burleson team with the address and photos for a measured scope.

Appointment
Confirmed for your address
Burleson contact
(817) 381-9385
County
Dallas County
ZIP codes served
75080, 75081, 75082

Confirm the complete Richardson job address and the requested service before scheduling. Listed ZIP codes are planning references, not a promise of availability at every property.

Everything we install in Richardson, TX →

Richardson pricing

What a Richardson floor costs

$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Richardson. Same price as at the shop. Contact Slabbr's Burleson team at (817) 381-9385 to confirm the job address, access and appointment. A city listing is not an arrival-time guarantee. All three builds compared, layer by layer.

The spec

What you are buying in Richardson

Cure to foot traffic
A few hours
Cure to vehicle traffic
72 hours
UV stability
Will not amber or yellow
Hot tire pickup
Fully resistant
Care and warranty
Service life depends on use, slab condition and maintenance; review the written warranty

When this is the wrong call

Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.

Straight answers

Polyaspartic Garage Floor Coating in Richardson: common questions

How much does polyaspartic garage floor coating cost in Richardson?

Polyaspartic Garage Floor Coating costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.

What does polyaspartic garage floor coating involve in Richardson?

Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.

When is polyaspartic garage floor coating the wrong choice in Richardson?

Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.

What does the polyaspartic garage floor coating specification include in Richardson?

Cure to foot traffic: A few hours. Cure to vehicle traffic: 72 hours. UV stability: Will not amber or yellow. Hot tire pickup: Fully resistant. Care and warranty: Service life depends on use, slab condition and maintenance; review the written warranty.

Who is polyaspartic garage floor coating best for in Richardson?

West and south facing garages that bake; Anyone who parks a car in hot after a summer drive; Fast turnarounds where the garage cannot sit for a week. Slabbr assesses your surface and intended use before confirming the service.

How long does polyaspartic garage floor coating take in Richardson?

Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.

Is polyaspartic garage floor coating warrantied in Richardson?

Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.

Do you use epoxy for polyaspartic garage floor coating in Richardson?

No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.

Can you replace an existing coating with polyaspartic garage floor coating in Richardson?

Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.

Which garage coating builds are available in Richardson?

Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.

Where is polyaspartic garage floor coating available in Richardson?

Slabbr serves Richardson, including Greenwood Hills, Cottonwood Creek, Breckinridge Point. ZIP codes in our service area include 75080, 75081, 75082. Contact our Burleson team to confirm your address and appointment.

Who do I call about polyaspartic garage floor coating in Richardson?

Contact Slabbr's Burleson team at (817) 381-9385. Send your Richardson address, approximate area and photos so we can review the polyaspartic garage floor coating scope.

What to confirm before your Richardson quote

  • The complete base, primer and topcoat specification
  • Existing coating removal and moisture assessment
  • Separate return times for walking, storage and parking

Send photographs and the complete job address when requesting your estimate. Slabbr confirms the measured scope, preparation or mounting conditions, schedule and applicable written terms before booking.

See your number in about a minute

Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Richardson.

Call now