Project resources
Pressure washing vs. concrete resurfacing: what does your slab need?
Pressure washing removes surface contamination; it does not replace worn concrete or install a new finish. If the slab is peeling, damaged or structurally cracked, request an assessment before choosing cleaning, coating, sealing or repair.
By Slabbr · Updated October 30, 2026
When cleaning is the right starting point
If the surface is sound but dirty, cleaning may be the appropriate first step. Identify oil, algae, rust or other contamination because the cleaning method depends on the problem. Tell the estimator about existing sealers and coatings.
Do not promise a like-new result from a photograph. Some stains can remain, and excessive pressure can damage a surface. Slabbr confirms the cleaning approach and measured area before the work.
When the surface needs more than washing
Peeling coating requires a decision about removal and the next finish. Scaling, deep damage, moving cracks or drainage problems may need repair beyond cosmetic work. Washing can expose those conditions but will not fix their underlying cause.
For a sound slab with an appearance problem, discuss coating, staining and sealing, polishing, or grind and seal. These are different processes. Slabbr’s service pages describe the method and starting pricing for each.
Write the boundary into the quote
State whether the job is cleaning only or includes removal, repair and a new finish. Include the measured surfaces, access, protection of nearby materials and handling of wash water according to site requirements.
If you intend to coat later, tell the installer before selecting a cleaning or sealing product. Residues or incompatible products can affect later preparation.
Common questions
Will pressure washing fix peeling epoxy?
No. Loose or failed material needs an assessment and appropriate removal or repair before a replacement finish can be specified.
Does Slabbr’s washing price include a new coating?
No. Cleaning and new coatings are separate scopes with separate pricing and preparation requirements.
Request your project quote
See your price
Two taps gets you the number. Nobody asks who you are first.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it.