Johnson County, Texas
Epoxy Flooring Alternative in Cleburne, TX
Epoxy Flooring in Cleburne, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. Our crews reach Cleburne in about 22 minutes, so a Cleburne floor is a normal working day and not a road trip.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Cleburne; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
22 minutes from the shop
Epoxy on Cleburne slabs
In Cleburne this is the polyaspartic answer to epoxy. Housing here is a deep stock of 1920s-1950s bungalows near the courthouse square, with 2015-present growth on the north and west edges, and garages are detached single-car rear garages downtown, two-car attached in the newer north-side subdivisions, so that is the slab we are quoting against. Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere. That is the honest limit of epoxy flooring in Cleburne, and we would rather say it here than on install day.
- Drive time from our shop
- 22 minutes
- Distance
- 18 miles
- Burleson shop
- (817) 381-9385
- County
- Johnson County
- ZIP codes served
- 76031, 76033
Service coverage in Cleburne: Burgess Meadows, Baker Farms, Courtland Place, Chisholm Hills, Trail Creek, Belle Lagos, Sunset Ridge.
Everything we install in Cleburne, TX →Cleburne pricing
What a Cleburne floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Cleburne. Same price as at the shop. Our crews reach Cleburne in about 22 minutes, so a Cleburne floor is a normal working day and not a road trip. All three builds compared, layer by layer.
The spec
What you are buying in Cleburne
- Epoxy cure to vehicles
- 5 to 7 days. Our polyaspartic: 72 hours
- Epoxy under UV
- Ambers. Polyaspartic holds its color
- Epoxy under hot tires
- Softens and lifts. Polyaspartic does not
- What we install
- 100 percent polyaspartic, base to topcoat
When this is the wrong call
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
Straight answers
Epoxy Flooring in Cleburne: common questions
How much does epoxy flooring cost in Cleburne?
Epoxy Flooring costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does epoxy flooring involve in Cleburne?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is epoxy flooring the wrong choice in Cleburne?
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
What does the epoxy flooring specification include in Cleburne?
Epoxy cure to vehicles: 5 to 7 days. Our polyaspartic: 72 hours. Epoxy under UV: Ambers. Polyaspartic holds its color. Epoxy under hot tires: Softens and lifts. Polyaspartic does not. What we install: 100 percent polyaspartic, base to topcoat.
Who is epoxy flooring best for in Cleburne?
Anyone shopping epoxy quotes who wants the floor to last; Budget-conscious builds; Commercial spaces with forklift and pallet traffic. Slabbr assesses your surface and intended use before confirming the service.
How long does epoxy flooring take in Cleburne?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is epoxy flooring warrantied in Cleburne?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for epoxy flooring in Cleburne?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with epoxy flooring in Cleburne?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Cleburne?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is epoxy flooring available in Cleburne?
Slabbr serves Cleburne, including Burgess Meadows, Baker Farms, Courtland Place. ZIP codes in our service area include 76031, 76033. Contact our Burleson team to confirm your address and appointment.
Who do I call about epoxy flooring in Cleburne?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Cleburne address, approximate area and photos so we can review the epoxy flooring scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Cleburne.