Johnson County, Texas
Concrete Coatings and Garage Storage in Cleburne, TX
Slabbr offers concrete coatings and garage storage in Cleburne, TX, through our Burleson team. Garage coating builds use polyaspartic base and top coats and run $2,650–$4,400 for 440 square feet, from Slabbr One through Ironclad. Most garage coatings take one day.
440 sq ft garage builds: $2,650–$4,400, One through Ironclad
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Lifetime residential garage coating warranty
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Diego Ramirez / Pexels
Local conditions
Cleburne slabs, specifically
Most of what we coat in Cleburne is a deep stock of 1920s-1950s bungalows near the courthouse square, with 2015-present growth on the north and west edges. That matters because slab age tells us what we are walking into before we get there. We work Burgess Meadows, Baker Farms, Courtland Place and Chisholm Hills regularly, and the garages in Cleburne are detached single-car rear garages downtown, two-car attached in the newer north-side subdivisions.
Cleburne is the Johnson County seat and grew up as a Santa Fe railroad shop town, so the older neighborhoods run to pier-and-beam with detached rear garages while everything built since the Chisholm Trail Parkway extension is slab-on-grade. Cleburne is in Johnson County, population about 31,400.
What we install in Cleburne
Every system, priced in the open
Residential
Garage Floor Coating in Cleburne
From $6 to $10 per sq ft
Polyaspartic Garage Floor Coating in Cleburne
From $8 to $10 per sq ft
Epoxy Flooring in Cleburne
From $6 to $12 per sq ft
Metallic Epoxy Floors in Cleburne
From $12 per sq ft
Quartz Epoxy Systems in Cleburne
From $10 per sq ft
Solid Color Epoxy in Cleburne
From $6 per sq ft
Stained and Sealed Concrete in Cleburne
From $4 per sq ft
Polished Concrete in Cleburne
From $7 to $12 per sq ft
Grind and Seal Concrete in Cleburne
From $4 per sq ft
Garage Organization in Cleburne
Clear the Floor from $2,150
Garage Slatwall in Cleburne
$14 per sq ft of wall
Overhead Garage Storage in Cleburne
$399 per 4×8 rack
Garage Cabinets in Cleburne
From $3,695 after measure
Outdoor
Commercial and industrial
Commercial Epoxy Flooring in Cleburne
From $4 to $12 per sq ft
Warehouse and Industrial Floor Coating in Cleburne
From $4 to $9 per sq ft
Auto Shop Floor Coating in Cleburne
From $6 to $10 per sq ft
Commercial Kitchen Flooring in Cleburne
From $8 to $14 per sq ft
Hangar Floor Coating in Cleburne
From $5 to $9 per sq ft
All three builds compared: pricing. How install day runs: our process. What is covered and for how long: the warranty. The standards we prep to: ASTM and ICRI.
Track record
Our crew has earned 150+ five-star reviews coating North Texas floors since 2019
Slabbr is a new name on the truck. The crew, the equipment and the standards behind it have been coating slabs across North Texas for years. Here is what that looks like in practice.
- 150+
- Five-star reviews earned by this crew
- coating North Texas floors since 2019
- 7
- Years coating North Texas slabs
- same crew, same equipment
- Lifetime
- Warranty on interior floors
- attached to the job, no registration
- Identical
- Price on the quote vs the invoice
- crack repair already included
Want to talk to someone who has stood on one of our floors? Ask on the call and we will put you in touch. Reach us at (903) 243-9525.
Straight answers
Coating a floor in Cleburne: common questions
Does Slabbr coat floors in Cleburne, TX?
Yes. Our crews reach Cleburne in about 22 minutes, so a Cleburne floor is a normal working day and not a road trip. We offer 21 coating, concrete-care and garage-storage services with published pricing.
How much does a garage floor coating cost in Cleburne?
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Cleburne. Crack and joint repair is included in all three.
Which Cleburne zip codes do you serve?
76031, 76033, all in Johnson County. Service coverage includes these neighborhoods in Cleburne: Burgess Meadows, Baker Farms, Courtland Place, Chisholm Hills, Trail Creek, Belle Lagos, Sunset Ridge.
What are Cleburne slabs usually like?
Housing in Cleburne is a deep stock of 1920s-1950s bungalows near the courthouse square, with 2015-present growth on the north and west edges. Building age is only background information. We inspect the actual slab, moisture and existing finish before confirming preparation.
What kind of garages does Cleburne have?
detached single-car rear garages downtown, two-car attached in the newer north-side subdivisions. Cleburne is the Johnson County seat and grew up as a Santa Fe railroad shop town, so the older neighborhoods run to pier-and-beam with detached rear garages while everything built since the Chisholm Trail Parkway extension is slab-on-grade.
Do you charge extra to drive to Cleburne?
No. Our crews reach Cleburne in about 22 minutes, so a Cleburne floor is a normal working day and not a road trip. We do not add a travel premium, or quote higher in the Cleburne zip codes with bigger houses.
Do you install epoxy in Cleburne?
No. Our coating systems use polyaspartic base and top coats. Polishing, staining and sealing, and cleaning are separate services with their own methods.
How long does a garage coating install take in Cleburne?
Most garage coatings take one day on the slab. Grinding, crack repair and coating all happen in the same visit. Walk on it after 24 hours in Cleburne, park on it after 72.
Is a Cleburne floor warrantied?
Residential garage coatings in Cleburne carry a lifetime warranty against delamination, peeling and flaking for as long as you own the home. Exterior work carries 10 years and commercial 2 years.
My Cleburne floor already has a failed coating. Can you fix it?
Yes. We grind the old coating off first. Removal adds 1.75 per square foot to the Cleburne quote and is priced up front rather than discovered on install day.
Who runs Cleburne jobs?
The Burleson shop. That number is (817) 381-9385, and it is the same number listed on that location's Google Business Profile.
Straight answers, real numbers
Homework before you hire in Cleburne
Aug 31, 2026
The 5 Garage Floor Coating Warranty Exclusions That Cancel the Claim You Would Actually File
Aug 29, 2026
The Sign-Today Discount, Decoded: How Garage Floor Sales Tactics Work
Aug 28, 2026
Compare Garage Floor Coating Quotes Before You Book
Aug 27, 2026
Bubbles in a New Epoxy Floor: Outgassing or Moisture, and Why the Wrong Diagnosis Fails Twice
What we install in Cleburne
- Garage Floor Coating in Cleburne
- Polyaspartic Garage Floor Coating in Cleburne
- Epoxy Flooring in Cleburne
- Metallic Epoxy Floors in Cleburne
- Quartz Epoxy Systems in Cleburne
- Solid Color Epoxy in Cleburne
- Stained and Sealed Concrete in Cleburne
- Polished Concrete in Cleburne
- Patio and Pool Deck Coating in Cleburne
- Driveway Coating in Cleburne
- Commercial Epoxy Flooring in Cleburne
- Warehouse and Industrial Floor Coating in Cleburne
- Auto Shop Floor Coating in Cleburne
- Commercial Kitchen Flooring in Cleburne
- Hangar Floor Coating in Cleburne
- Grind and Seal Concrete in Cleburne
- Pressure Washing in Cleburne
- Garage Organization in Cleburne
- Garage Slatwall in Cleburne
- Overhead Garage Storage in Cleburne
- Garage Cabinets in Cleburne
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Cleburne.