Oklahoma County, Oklahoma
Epoxy Flooring Alternative in Edmond, OK
Epoxy Flooring in Edmond, OK costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. We are 215 minutes from Edmond, running out of our shop in Celina.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Edmond; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
215 minutes from the shop
Epoxy on Edmond slabs
In Edmond this is the polyaspartic answer to epoxy. Housing here is a post-1970 suburban explosion with a small pre-war core, the city running from 8,577 people in 1960 to 94,428 by 2020, so the bulk of the stock is 1980 to 2020 while downtown dates to the 1889 Land Run, and garages are the metro's highest-income large suburb with the newest large-lot stock, which is where three-car front-entry and side-entry garages concentrate, while the 1970s to 1990s subdivisions are two-car attached, so that is the slab we are quoting against. Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere. That is the honest limit of epoxy flooring in Edmond, and we would rather say it here than on install day.
- Drive time from our shop
- 215 minutes
- Distance
- 185 miles
- Celina shop
- (903) 243-9525
- County
- Oklahoma County
- ZIP codes served
- 73003, 73012, 73013, 73025, 73034
Service coverage in Edmond: Oak Tree, downtown Edmond, Fairfax, Coffee Creek, Iron Horse Ranch, Kelly Lakes.
Everything we install in Edmond, OK →Edmond pricing
What a Edmond floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Edmond. Same price as at the shop. We are 215 minutes from Edmond, running out of our shop in Celina. All three builds compared, layer by layer.
The spec
What you are buying in Edmond
- Epoxy cure to vehicles
- 5 to 7 days. Our polyaspartic: 72 hours
- Epoxy under UV
- Ambers. Polyaspartic holds its color
- Epoxy under hot tires
- Softens and lifts. Polyaspartic does not
- What we install
- 100 percent polyaspartic, base to topcoat
When this is the wrong call
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
Straight answers
Epoxy Flooring in Edmond: common questions
How much does epoxy flooring cost in Edmond?
Epoxy Flooring costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does epoxy flooring involve in Edmond?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is epoxy flooring the wrong choice in Edmond?
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
What does the epoxy flooring specification include in Edmond?
Epoxy cure to vehicles: 5 to 7 days. Our polyaspartic: 72 hours. Epoxy under UV: Ambers. Polyaspartic holds its color. Epoxy under hot tires: Softens and lifts. Polyaspartic does not. What we install: 100 percent polyaspartic, base to topcoat.
Who is epoxy flooring best for in Edmond?
Anyone shopping epoxy quotes who wants the floor to last; Budget-conscious builds; Commercial spaces with forklift and pallet traffic. Slabbr assesses your surface and intended use before confirming the service.
How long does epoxy flooring take in Edmond?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is epoxy flooring warrantied in Edmond?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for epoxy flooring in Edmond?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with epoxy flooring in Edmond?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Edmond?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is epoxy flooring available in Edmond?
Slabbr serves Edmond, including Oak Tree, downtown Edmond, Fairfax. ZIP codes in our service area include 73003, 73012, 73013, 73025, 73034. Contact our Celina team to confirm your address and appointment.
Who do I call about epoxy flooring in Edmond?
Contact Slabbr's Celina team at (903) 243-9525. Send your Edmond address, approximate area and photos so we can review the epoxy flooring scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Edmond.