Oklahoma County, Oklahoma
Epoxy Flooring Alternative in Oklahoma City, OK
Epoxy Flooring in Oklahoma City, OK costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. We are 210 minutes from Oklahoma City, running out of our shop in Celina.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Oklahoma City; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
210 minutes from the shop
Epoxy on Oklahoma City slabs
In Oklahoma City this is the polyaspartic answer to epoxy. Housing here is the most stratified stock in the metro: 1903 to 1944 across nine city-designated historic preservation districts, 1960s golf-course suburbia in Quail Creek, and continuous 1970s to 2020s expansion across a 622 square mile city limit, and garages are in the historic core, city preservation guidelines put accessory buildings including garages to the back of the primary building following historic setback patterns, so detached rear garages on alleys are the rule there, while the post-war and modern rings run conventional two-car attached and three-car in the newer far north and far west additions, so that is the slab we are quoting against. Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere. That is the honest limit of epoxy flooring in Oklahoma City, and we would rather say it here than on install day.
- Drive time from our shop
- 210 minutes
- Distance
- 178 miles
- Celina shop
- (903) 243-9525
- County
- Oklahoma County
- ZIP codes served
- 73102, 73103, 73105, 73107, 73108, 73109, 73112, 73114, 73116, 73118, 73120, 73127, 73129, 73132, 73142, 73162, 73170
Service coverage in Oklahoma City: Heritage Hills, Mesta Park, Crown Heights, Edgemere Park, Paseo, Quail Creek, Deer Creek, Nichols Hills.
Everything we install in Oklahoma City, OK →Oklahoma City pricing
What a Oklahoma City floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Oklahoma City. Same price as at the shop. We are 210 minutes from Oklahoma City, running out of our shop in Celina. All three builds compared, layer by layer.
The spec
What you are buying in Oklahoma City
- Epoxy cure to vehicles
- 5 to 7 days. Our polyaspartic: 72 hours
- Epoxy under UV
- Ambers. Polyaspartic holds its color
- Epoxy under hot tires
- Softens and lifts. Polyaspartic does not
- What we install
- 100 percent polyaspartic, base to topcoat
When this is the wrong call
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
Straight answers
Epoxy Flooring in Oklahoma City: common questions
How much does epoxy flooring cost in Oklahoma City?
Epoxy Flooring costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does epoxy flooring involve in Oklahoma City?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is epoxy flooring the wrong choice in Oklahoma City?
Do not put epoxy on a patio, a pool deck, a driveway, or any slab that sees direct sun, no matter who quotes it. It will yellow, and no warranty covers a product used outside its design. We will not install it anywhere.
What does the epoxy flooring specification include in Oklahoma City?
Epoxy cure to vehicles: 5 to 7 days. Our polyaspartic: 72 hours. Epoxy under UV: Ambers. Polyaspartic holds its color. Epoxy under hot tires: Softens and lifts. Polyaspartic does not. What we install: 100 percent polyaspartic, base to topcoat.
Who is epoxy flooring best for in Oklahoma City?
Anyone shopping epoxy quotes who wants the floor to last; Budget-conscious builds; Commercial spaces with forklift and pallet traffic. Slabbr assesses your surface and intended use before confirming the service.
How long does epoxy flooring take in Oklahoma City?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is epoxy flooring warrantied in Oklahoma City?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for epoxy flooring in Oklahoma City?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with epoxy flooring in Oklahoma City?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Oklahoma City?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is epoxy flooring available in Oklahoma City?
Slabbr serves Oklahoma City, including Heritage Hills, Mesta Park, Crown Heights. ZIP codes in our service area include 73102, 73103, 73105, 73107, 73108, 73109, 73112, 73114, 73116, 73118, 73120, 73127, 73129, 73132, 73142, 73162, 73170. Contact our Celina team to confirm your address and appointment.
Who do I call about epoxy flooring in Oklahoma City?
Contact Slabbr's Celina team at (903) 243-9525. Send your Oklahoma City address, approximate area and photos so we can review the epoxy flooring scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Oklahoma City.