Johnson County, Texas
Garage Floor Coating in Burleson, TX
Garage Floor Coating in Burleson, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. Our Burleson team serves the southwest metroplex, from Fort Worth down through Johnson and Ellis counties.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Burleson; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: hi room / Pexels
Your Burleson team
Garage floors on Burleson slabs
In Burleson this is the standard flake garage floor. Housing here is a 1970s core around Old Town with heavy 1998-2015 build-out along the Hwy 174 and County Road 1020 corridors, and garages are two-car front-entry is standard, with three-car garages common in the post-2005 Hwy 174 subdivisions, so that is the slab we are quoting against. If your slab is actively heaving with a crack over half an inch that is still moving, a coating is cosmetic. That is a foundation conversation first, a floor conversation second, and we will tell you so on the estimate rather than take the job. That is the honest limit of garage floor coating in Burleson, and we would rather say it here than on install day.
- Service area
- Tarrant, Johnson, Ellis, Parker, Dallas, Hood, Somervell, Navarro counties
- Burleson shop
- (817) 381-9385
- County
- Johnson County
- ZIP codes served
- 76028, 76097
Service coverage in Burleson: Mistletoe Hill, Shannon Creek, Elk Ridge Estates, Villages of Wakefield, Parks at Panchasarp Farms, Hidden Vistas, Mountain Valley Lake.
Everything we install in Burleson, TX →Burleson pricing
What a Burleson floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Burleson. Same price as at the shop. Our Burleson team serves the southwest metroplex, from Fort Worth down through Johnson and Ellis counties. All three builds compared, layer by layer.
The spec
What you are buying in Burleson
- Install time
- One day for most 2 and 3 car garages
- Walk on it
- 24 hours
- Park on it
- 72 hours
- Expected life
- 20 years plus on the Prime and Ironclad builds
- Warranty
- Lifetime residential
When this is the wrong call
If your slab is actively heaving with a crack over half an inch that is still moving, a coating is cosmetic. That is a foundation conversation first, a floor conversation second, and we will tell you so on the estimate rather than take the job.
Straight answers
Garage Floor Coating in Burleson: common questions
How much does garage floor coating cost in Burleson?
Garage Floor Coating costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does garage floor coating involve in Burleson?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is garage floor coating the wrong choice in Burleson?
If your slab is actively heaving with a crack over half an inch that is still moving, a coating is cosmetic. That is a foundation conversation first, a floor conversation second, and we will tell you so on the estimate rather than take the job.
What does the garage floor coating specification include in Burleson?
Install time: One day for most 2 and 3 car garages. Walk on it: 24 hours. Park on it: 72 hours. Expected life: 20 years plus on the Prime and Ironclad builds. Warranty: Lifetime residential.
Who is garage floor coating best for in Burleson?
Daily-driver garages; Slabs that dust or stain; Failed DIY kits that need stripping; New construction slabs past 28 days. Slabbr assesses your surface and intended use before confirming the service.
How long does garage floor coating take in Burleson?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is garage floor coating warrantied in Burleson?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for garage floor coating in Burleson?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with garage floor coating in Burleson?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Burleson?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is garage floor coating available in Burleson?
Slabbr serves Burleson, including Mistletoe Hill, Shannon Creek, Elk Ridge Estates. ZIP codes in our service area include 76028, 76097. Contact our Burleson team to confirm your address and appointment.
Who do I call about garage floor coating in Burleson?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Burleson address, approximate area and photos so we can review the garage floor coating scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Burleson.