Johnson County, Texas
Aircraft Hangar Floor Coating in Burleson, TX
Hangar Floor Coating in Burleson, TX costs $5–$9 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Our Burleson team serves the southwest metroplex, from Fort Worth down through Johnson and Ellis counties.
$5–$9 per square foot in Burleson; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Commercial coatings carry a 2-year warranty.
- Written fixed price, no sales visit needed
Request a site visit
Commercial floors get bid on site, not from an airphoto. Pick a day and a window; we confirm by phone the same business day.
Photo: Ricky Esquivel / Pexels
Your Burleson team
Hangars on Burleson slabs
Burleson commercial work means hangar and large-span floors, and the slabs are a 1970s core around Old Town with heavy 1998-2015 build-out along the Hwy 174 and County Road 1020 corridors, which is what sets the grind time before a bid goes out. Hangar slabs poured for aircraft weight are often in better shape than the coating budget assumes. If your slab is sound, polished concrete may serve better and cost less. That is the honest limit of hangar floor coating in Burleson, and we would rather say it here than on install day.
- Service area
- Tarrant, Johnson, Ellis, Parker, Dallas, Hood, Somervell, Navarro counties
- Burleson shop
- (817) 381-9385
- County
- Johnson County
- ZIP codes served
- 76028, 76097
Service coverage in Burleson: Mistletoe Hill, Shannon Creek, Elk Ridge Estates, Villages of Wakefield, Parks at Panchasarp Farms, Hidden Vistas, Mountain Valley Lake.
Everything we install in Burleson, TX →The spec
What you are buying in Burleson
- Chemical resistance
- Avgas, jet fuel, hydraulic fluid
- Reflectivity
- High gloss to lift working light
- Span
- Large open areas, phased in sections
- Striping
- Tow lines and parking positions available
When this is the wrong call
Hangar slabs poured for aircraft weight are often in better shape than the coating budget assumes. If your slab is sound, polished concrete may serve better and cost less.
Straight answers
Hangar Floor Coating in Burleson: common questions
How much does hangar floor coating cost in Burleson?
Hangar Floor Coating costs $5–$9 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does hangar floor coating involve in Burleson?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is hangar floor coating the wrong choice in Burleson?
Hangar slabs poured for aircraft weight are often in better shape than the coating budget assumes. If your slab is sound, polished concrete may serve better and cost less.
What does the hangar floor coating specification include in Burleson?
Chemical resistance: Avgas, jet fuel, hydraulic fluid. Reflectivity: High gloss to lift working light. Span: Large open areas, phased in sections. Striping: Tow lines and parking positions available.
Who is hangar floor coating best for in Burleson?
Private and corporate hangars; Boat and RV storage; Equipment barns; Large open-span storage. Slabbr assesses your surface and intended use before confirming the service.
How long does hangar floor coating take in Burleson?
Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is hangar floor coating warrantied in Burleson?
Commercial coatings carry a 2-year warranty. The written scope specifies coverage and exclusions.
Do you use epoxy for hangar floor coating in Burleson?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with hangar floor coating in Burleson?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is hangar floor coating available in Burleson?
Slabbr serves Burleson, including Mistletoe Hill, Shannon Creek, Elk Ridge Estates. ZIP codes in our service area include 76028, 76097. Contact our Burleson team to confirm your address and appointment.
Who do I call about hangar floor coating in Burleson?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Burleson address, approximate area and photos so we can review the hangar floor coating scope.
Get your floor walked and bid
Commercial floors get measured on site: slab condition, joints, chemistry, and the downtime plan that keeps you open. Pick a day and a time window in Burleson, and the bid comes back itemized and firm.