Johnson County, Texas
Aircraft Hangar Floor Coating in Keene, TX
Hangar Floor Coating in Keene, TX costs $5–$9 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Keene sits about 14 miles from the Burleson shop, roughly 18 minutes with a trailer.
$5–$9 per square foot in Keene; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Commercial coatings carry a 2-year warranty.
- Written fixed price, no sales visit needed
Request a site visit
Commercial floors get bid on site, not from an airphoto. Pick a day and a window; we confirm by phone the same business day.
Photo: Ricky Esquivel / Pexels
18 minutes from the shop
Hangars on Keene slabs
Keene commercial work means hangar and large-span floors, and the slabs are median build year around 1986, a mix of ranch houses and porch bungalows, with new D.R. Horton product going in at The Canyons, which is what sets the grind time before a bid goes out. Hangar slabs poured for aircraft weight are often in better shape than the coating budget assumes. If your slab is sound, polished concrete may serve better and cost less. That is the honest limit of hangar floor coating in Keene, and we would rather say it here than on install day.
- Drive time from our shop
- 18 minutes
- Distance
- 14 miles
- Burleson shop
- (817) 381-9385
- County
- Johnson County
- ZIP codes served
- 76059
Service coverage in Keene: The Canyons, Old Betsy Road corridor, Southwestern Adventist University district.
Everything we install in Keene, TX →The spec
What you are buying in Keene
- Chemical resistance
- Avgas, jet fuel, hydraulic fluid
- Reflectivity
- High gloss to lift working light
- Span
- Large open areas, phased in sections
- Striping
- Tow lines and parking positions available
When this is the wrong call
Hangar slabs poured for aircraft weight are often in better shape than the coating budget assumes. If your slab is sound, polished concrete may serve better and cost less.
Straight answers
Hangar Floor Coating in Keene: common questions
How much does hangar floor coating cost in Keene?
Hangar Floor Coating costs $5–$9 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does hangar floor coating involve in Keene?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is hangar floor coating the wrong choice in Keene?
Hangar slabs poured for aircraft weight are often in better shape than the coating budget assumes. If your slab is sound, polished concrete may serve better and cost less.
What does the hangar floor coating specification include in Keene?
Chemical resistance: Avgas, jet fuel, hydraulic fluid. Reflectivity: High gloss to lift working light. Span: Large open areas, phased in sections. Striping: Tow lines and parking positions available.
Who is hangar floor coating best for in Keene?
Private and corporate hangars; Boat and RV storage; Equipment barns; Large open-span storage. Slabbr assesses your surface and intended use before confirming the service.
How long does hangar floor coating take in Keene?
Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is hangar floor coating warrantied in Keene?
Commercial coatings carry a 2-year warranty. The written scope specifies coverage and exclusions.
Do you use epoxy for hangar floor coating in Keene?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with hangar floor coating in Keene?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is hangar floor coating available in Keene?
Slabbr serves Keene, including The Canyons, Old Betsy Road corridor, Southwestern Adventist University district. ZIP codes in our service area include 76059. Contact our Burleson team to confirm your address and appointment.
Who do I call about hangar floor coating in Keene?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Keene address, approximate area and photos so we can review the hangar floor coating scope.
Get your floor walked and bid
Commercial floors get measured on site: slab condition, joints, chemistry, and the downtime plan that keeps you open. Pick a day and a time window in Keene, and the bid comes back itemized and firm.