Dallas County, Texas
Aircraft Hangar Floor Coating in Grand Prairie, TX
Hangar Floor Coating in Grand Prairie, TX costs $5–$9 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Grand Prairie sits about 30 miles from the Burleson shop, roughly 35 minutes with a trailer.
$5–$9 per square foot in Grand Prairie; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Commercial coatings carry a 2-year warranty.
- Written fixed price, no sales visit needed
Request a site visit
Commercial floors get bid on site, not from an airphoto. Pick a day and a window; we confirm by phone the same business day.
Photo: Ricky Esquivel / Pexels
35 minutes from the shop
Hangars on Grand Prairie slabs
Grand Prairie commercial work means hangar and large-span floors, and the slabs are 1950s-70s in the original north end near Main Street, with the entire south end built out 1998-2015 around Joe Pool Lake, which is what sets the grind time before a bid goes out. Hangar slabs poured for aircraft weight are often in better shape than the coating budget assumes. If your slab is sound, polished concrete may serve better and cost less. That is the honest limit of hangar floor coating in Grand Prairie, and we would rather say it here than on install day.
- Drive time from our shop
- 35 minutes
- Distance
- 30 miles
- Burleson shop
- (817) 381-9385
- County
- Dallas County
- ZIP codes served
- 75050, 75051, 75052, 75054
Service coverage in Grand Prairie: Mira Lagos, Grand Peninsula, Lake Parks, Westchester, Silverbrook, Coronado Forest, Kirby Creek Village.
Everything we install in Grand Prairie, TX →The spec
What you are buying in Grand Prairie
- Chemical resistance
- Avgas, jet fuel, hydraulic fluid
- Reflectivity
- High gloss to lift working light
- Span
- Large open areas, phased in sections
- Striping
- Tow lines and parking positions available
When this is the wrong call
Hangar slabs poured for aircraft weight are often in better shape than the coating budget assumes. If your slab is sound, polished concrete may serve better and cost less.
Straight answers
Hangar Floor Coating in Grand Prairie: common questions
How much does hangar floor coating cost in Grand Prairie?
Hangar Floor Coating costs $5–$9 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does hangar floor coating involve in Grand Prairie?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is hangar floor coating the wrong choice in Grand Prairie?
Hangar slabs poured for aircraft weight are often in better shape than the coating budget assumes. If your slab is sound, polished concrete may serve better and cost less.
What does the hangar floor coating specification include in Grand Prairie?
Chemical resistance: Avgas, jet fuel, hydraulic fluid. Reflectivity: High gloss to lift working light. Span: Large open areas, phased in sections. Striping: Tow lines and parking positions available.
Who is hangar floor coating best for in Grand Prairie?
Private and corporate hangars; Boat and RV storage; Equipment barns; Large open-span storage. Slabbr assesses your surface and intended use before confirming the service.
How long does hangar floor coating take in Grand Prairie?
Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is hangar floor coating warrantied in Grand Prairie?
Commercial coatings carry a 2-year warranty. The written scope specifies coverage and exclusions.
Do you use epoxy for hangar floor coating in Grand Prairie?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with hangar floor coating in Grand Prairie?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is hangar floor coating available in Grand Prairie?
Slabbr serves Grand Prairie, including Mira Lagos, Grand Peninsula, Lake Parks. ZIP codes in our service area include 75050, 75051, 75052, 75054. Contact our Burleson team to confirm your address and appointment.
Who do I call about hangar floor coating in Grand Prairie?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Grand Prairie address, approximate area and photos so we can review the hangar floor coating scope.
Get your floor walked and bid
Commercial floors get measured on site: slab condition, joints, chemistry, and the downtime plan that keeps you open. Pick a day and a time window in Grand Prairie, and the bid comes back itemized and firm.