Dallas County, Texas
Polished Concrete in Grand Prairie, TX
Polished Concrete in Grand Prairie, TX costs $7–$12 per square foot. Slabbr mechanically grinds, densifies and polishes the existing concrete. This is a concrete finish, not a polyaspartic or epoxy coating. Timing is confirmed after a site assessment. Grand Prairie sits about 30 miles from the Burleson shop, roughly 35 minutes with a trailer.
$7–$12 per square foot in Grand Prairie; final scope after assessment
- Method matched to your concrete and intended use
- Schedule and return to use confirmed with your scope
- Ask for the warranty terms for your selected finish and written scope.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Luke Miller / Pexels
35 minutes from the shop
Polished concrete on Grand Prairie slabs
In Grand Prairie this is polished concrete. Housing here is 1950s-70s in the original north end near Main Street, with the entire south end built out 1998-2015 around Joe Pool Lake, and garages are two-car front-entry in the south end master plans, one-car and carports common in the older north sections, so that is the slab we are quoting against. Polishing exposes whatever is in your slab, including patches, pipe chases and aggregate variation. On a poor pour it will look worse than a coating, and it cannot fix a slab that is stained through. That is the honest limit of polished concrete in Grand Prairie, and we would rather say it here than on install day.
- Drive time from our shop
- 35 minutes
- Distance
- 30 miles
- Burleson shop
- (817) 381-9385
- County
- Dallas County
- ZIP codes served
- 75050, 75051, 75052, 75054
Service coverage in Grand Prairie: Mira Lagos, Grand Peninsula, Lake Parks, Westchester, Silverbrook, Coronado Forest, Kirby Creek Village.
Everything we install in Grand Prairie, TX →The spec
What you are buying in Grand Prairie
- Failure mode
- None involving delamination. There is no coating
- Maintenance
- Dust mop and periodic burnish
- Gloss levels
- Matte through mirror, by grit sequence
- Install time
- Two to five days by square footage
When this is the wrong call
Polishing exposes whatever is in your slab, including patches, pipe chases and aggregate variation. On a poor pour it will look worse than a coating, and it cannot fix a slab that is stained through.
Straight answers
Polished Concrete in Grand Prairie: common questions
How much does polished concrete cost in Grand Prairie?
Polished Concrete costs $7–$12 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does polished concrete involve in Grand Prairie?
Slabbr mechanically grinds, densifies and polishes the existing concrete. This is a concrete finish, not a polyaspartic or epoxy coating.
When is polished concrete the wrong choice in Grand Prairie?
Polishing exposes whatever is in your slab, including patches, pipe chases and aggregate variation. On a poor pour it will look worse than a coating, and it cannot fix a slab that is stained through.
What does the polished concrete specification include in Grand Prairie?
Failure mode: None involving delamination. There is no coating. Maintenance: Dust mop and periodic burnish. Gloss levels: Matte through mirror, by grit sequence. Install time: Two to five days by square footage.
Who is polished concrete best for in Grand Prairie?
Warehouses and distribution; Retail and showrooms; Modern residential interiors; Anywhere forklift traffic would chew a coating. Slabbr assesses your surface and intended use before confirming the service.
How long does polished concrete take in Grand Prairie?
Install time: Two to five days by square footage. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is polished concrete warrantied in Grand Prairie?
Ask for the warranty terms for your selected finish and written scope. The written scope specifies coverage and exclusions.
Where is polished concrete available in Grand Prairie?
Slabbr serves Grand Prairie, including Mira Lagos, Grand Peninsula, Lake Parks. ZIP codes in our service area include 75050, 75051, 75052, 75054. Contact our Burleson team to confirm your address and appointment.
Who do I call about polished concrete in Grand Prairie?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Grand Prairie address, approximate area and photos so we can review the polished concrete scope.
Polished concrete nearby
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Grand Prairie.