Johnson County, Texas
Metallic Epoxy Floor Alternative in Burleson, TX
Metallic Epoxy Floors in Burleson, TX costs $12 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Our Burleson team serves the southwest metroplex, from Fort Worth down through Johnson and Ellis counties.
$12 per square foot in Burleson; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Diana ✨ / Pexels
Your Burleson team
Metallic on Burleson slabs
In Burleson this is decorative metallic floors. Housing here is a 1970s core around Old Town with heavy 1998-2015 build-out along the Hwy 174 and County Road 1020 corridors, and garages are two-car front-entry is standard, with three-car garages common in the post-2005 Hwy 174 subdivisions, so that is the slab we are quoting against. Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today. That is the honest limit of metallic epoxy floors in Burleson, and we would rather say it here than on install day.
- Service area
- Tarrant, Johnson, Ellis, Parker, Dallas, Hood, Somervell, Navarro counties
- Burleson shop
- (817) 381-9385
- County
- Johnson County
- ZIP codes served
- 76028, 76097
Service coverage in Burleson: Mistletoe Hill, Shannon Creek, Elk Ridge Estates, Villages of Wakefield, Parks at Panchasarp Farms, Hidden Vistas, Mountain Valley Lake.
Everything we install in Burleson, TX →The spec
What you are buying in Burleson
- Install time
- Two days for most residential spaces
- Finish
- High gloss, one of a kind
- Repeatability
- None. Every floor is unique by design
- Topcoat
- Polyaspartic wear layer over the metallic
When this is the wrong call
Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today.
Straight answers
Metallic Epoxy Floors in Burleson: common questions
How much does metallic epoxy floors cost in Burleson?
Metallic Epoxy Floors costs $12 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does metallic epoxy floors involve in Burleson?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is metallic epoxy floors the wrong choice in Burleson?
Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today.
What does the metallic epoxy floors specification include in Burleson?
Install time: Two days for most residential spaces. Finish: High gloss, one of a kind. Repeatability: None. Every floor is unique by design. Topcoat: Polyaspartic wear layer over the metallic.
Who is metallic epoxy floors best for in Burleson?
Showrooms and retail; Basements and finished interiors; Garages built to be looked at; Entryways and lobbies. Slabbr assesses your surface and intended use before confirming the service.
How long does metallic epoxy floors take in Burleson?
Install time: Two days for most residential spaces. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is metallic epoxy floors warrantied in Burleson?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for metallic epoxy floors in Burleson?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with metallic epoxy floors in Burleson?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is metallic epoxy floors available in Burleson?
Slabbr serves Burleson, including Mistletoe Hill, Shannon Creek, Elk Ridge Estates. ZIP codes in our service area include 76028, 76097. Contact our Burleson team to confirm your address and appointment.
Who do I call about metallic epoxy floors in Burleson?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Burleson address, approximate area and photos so we can review the metallic epoxy floors scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Burleson.