Johnson County, Texas
Solid Color Epoxy Floor Alternative in Burleson, TX
Solid Color Epoxy in Burleson, TX costs $6 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Our Burleson team serves the southwest metroplex, from Fort Worth down through Johnson and Ellis counties.
$6 per square foot in Burleson; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
Your Burleson team
Solid color on Burleson slabs
In Burleson this is solid color floors. Housing here is a 1970s core around Old Town with heavy 1998-2015 build-out along the Hwy 174 and County Road 1020 corridors, and garages are two-car front-entry is standard, with three-car garages common in the post-2005 Hwy 174 subdivisions, so that is the slab we are quoting against. A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice. That is the honest limit of solid color epoxy in Burleson, and we would rather say it here than on install day.
- Service area
- Tarrant, Johnson, Ellis, Parker, Dallas, Hood, Somervell, Navarro counties
- Burleson shop
- (817) 381-9385
- County
- Johnson County
- ZIP codes served
- 76028, 76097
Service coverage in Burleson: Mistletoe Hill, Shannon Creek, Elk Ridge Estates, Villages of Wakefield, Parks at Panchasarp Farms, Hidden Vistas, Mountain Valley Lake.
Everything we install in Burleson, TX →The spec
What you are buying in Burleson
- Colors
- Hundreds, matched to standard color decks
- Install time
- One day
- Maintenance
- Shows dust faster than flake, cleans just as easily
When this is the wrong call
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
Straight answers
Solid Color Epoxy in Burleson: common questions
How much does solid color epoxy cost in Burleson?
Solid Color Epoxy costs $6 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does solid color epoxy involve in Burleson?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is solid color epoxy the wrong choice in Burleson?
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
What does the solid color epoxy specification include in Burleson?
Colors: Hundreds, matched to standard color decks. Install time: One day. Maintenance: Shows dust faster than flake, cleans just as easily.
Who is solid color epoxy best for in Burleson?
Workshops and storage buildings; Rental properties; Commercial back-of-house; Anywhere a busy pattern would fight the space. Slabbr assesses your surface and intended use before confirming the service.
How long does solid color epoxy take in Burleson?
Install time: One day. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is solid color epoxy warrantied in Burleson?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for solid color epoxy in Burleson?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with solid color epoxy in Burleson?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is solid color epoxy available in Burleson?
Slabbr serves Burleson, including Mistletoe Hill, Shannon Creek, Elk Ridge Estates. ZIP codes in our service area include 76028, 76097. Contact our Burleson team to confirm your address and appointment.
Who do I call about solid color epoxy in Burleson?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Burleson address, approximate area and photos so we can review the solid color epoxy scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Burleson.