Skip to content

TODAY ONLY: Save $250 when you call or get your quote by text

Ends midnight CT

Call (903) 243-9525
Slabbr

Denton County, Texas

Patio and Pool Deck Coating in Argyle, TX

Patio and Pool Deck Coating in Argyle, TX costs $8–$10 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Our crews reach Argyle in about 45 minutes, so a Argyle floor is a normal working day and not a road trip.

$8–$10 per square foot in Argyle; final scope after assessment

  • Coating preparation: diamond ground, never acid etched
  • Schedule and return to use confirmed with your scope
  • Exterior coatings carry a 10-year warranty.
  • Written fixed price, no sales visit needed

See your price

Two taps gets you the number. Nobody asks who you are first.

About 440 sq ft. The most common garage in Texas.. No sales visit required to see the number.

Photo: Matheus Bertelli / Pexels

45 minutes from the shop

Patios and pool decks on Argyle slabs

In Argyle this is patio and pool deck coatings. Housing here is one-acre custom homes from the 1990s and 2000s plus the Harvest and Canyon Falls master plans begun in the 2010s, and garages are three-car side-entry on the acreage lots, two and three-car front-entry inside Harvest, so that is the slab we are quoting against. A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty. That is the honest limit of patio and pool deck coating in Argyle, and we would rather say it here than on install day.

Drive time from our shop
45 minutes
Distance
41 miles
Burleson shop
(817) 381-9385
County
Denton County
ZIP codes served
76226

Service coverage in Argyle: Harvest, Canyon Falls, Country Lakes, Waterbrook, The Oaks of Argyle, Hills of Argyle, 5T Ranch.

Everything we install in Argyle, TX →

The spec

What you are buying in Argyle

UV stability
Will not yellow. Non-negotiable outdoors
Slip resistance
Anti-slip additive standard, not an upsell
Surface temperature
Lighter finishes stay usable barefoot in summer
Warranty
10 years exterior

When this is the wrong call

A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.

Straight answers

Patio and Pool Deck Coating in Argyle: common questions

How much does patio and pool deck coating cost in Argyle?

Patio and Pool Deck Coating costs $8–$10 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.

What does patio and pool deck coating involve in Argyle?

Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.

When is patio and pool deck coating the wrong choice in Argyle?

A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.

What does the patio and pool deck coating specification include in Argyle?

UV stability: Will not yellow. Non-negotiable outdoors. Slip resistance: Anti-slip additive standard, not an upsell. Surface temperature: Lighter finishes stay usable barefoot in summer. Warranty: 10 years exterior.

Who is patio and pool deck coating best for in Argyle?

Pool surrounds; Covered and uncovered patios; Outdoor kitchens; Front porches and walkways. Slabbr assesses your surface and intended use before confirming the service.

How long does patio and pool deck coating take in Argyle?

Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.

Is patio and pool deck coating warrantied in Argyle?

Exterior coatings carry a 10-year warranty. The written scope specifies coverage and exclusions.

Do you use epoxy for patio and pool deck coating in Argyle?

No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.

Can you replace an existing coating with patio and pool deck coating in Argyle?

Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.

Where is patio and pool deck coating available in Argyle?

Slabbr serves Argyle, including Harvest, Canyon Falls, Country Lakes. ZIP codes in our service area include 76226. Contact our Burleson team to confirm your address and appointment.

Who do I call about patio and pool deck coating in Argyle?

Contact Slabbr's Burleson team at (817) 381-9385. Send your Argyle address, approximate area and photos so we can review the patio and pool deck coating scope.

See your number in about a minute

Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Argyle.

Call now