Collin County, Texas
Patio and Pool Deck Coating in Frisco, TX
Patio and Pool Deck Coating in Frisco, TX costs $8–$10 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Our Frisco team serves Frisco and Collin, Denton and Dallas counties.
$8–$10 per square foot in Frisco; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Exterior coatings carry a 10-year warranty.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Matheus Bertelli / Pexels
Your Frisco team
Patios and pool decks on Frisco slabs
In Frisco this is patio and pool deck coatings. Housing here is essentially all post-1998, with the heaviest single decade of construction between 2003 and 2013, and garages are three-car garages are standard, frequently a two-plus-one tandem or swing-in configuration, so that is the slab we are quoting against. A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty. That is the honest limit of patio and pool deck coating in Frisco, and we would rather say it here than on install day.
- Service area
- Collin, Denton, Dallas counties
- Frisco shop
- (214) 233-6712
- County
- Collin County
- ZIP codes served
- 75033, 75034, 75035, 75036
Service coverage in Frisco: Starwood, Phillips Creek Ranch, Newman Village, Stonebriar, Richwoods, Frisco Lakes, Hollyhock.
Everything we install in Frisco, TX →The spec
What you are buying in Frisco
- UV stability
- Will not yellow. Non-negotiable outdoors
- Slip resistance
- Anti-slip additive standard, not an upsell
- Surface temperature
- Lighter finishes stay usable barefoot in summer
- Warranty
- 10 years exterior
When this is the wrong call
A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.
Straight answers
Patio and Pool Deck Coating in Frisco: common questions
How much does patio and pool deck coating cost in Frisco?
Patio and Pool Deck Coating costs $8–$10 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does patio and pool deck coating involve in Frisco?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is patio and pool deck coating the wrong choice in Frisco?
A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.
What does the patio and pool deck coating specification include in Frisco?
UV stability: Will not yellow. Non-negotiable outdoors. Slip resistance: Anti-slip additive standard, not an upsell. Surface temperature: Lighter finishes stay usable barefoot in summer. Warranty: 10 years exterior.
Who is patio and pool deck coating best for in Frisco?
Pool surrounds; Covered and uncovered patios; Outdoor kitchens; Front porches and walkways. Slabbr assesses your surface and intended use before confirming the service.
How long does patio and pool deck coating take in Frisco?
Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is patio and pool deck coating warrantied in Frisco?
Exterior coatings carry a 10-year warranty. The written scope specifies coverage and exclusions.
Do you use epoxy for patio and pool deck coating in Frisco?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with patio and pool deck coating in Frisco?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is patio and pool deck coating available in Frisco?
Slabbr serves Frisco, including Starwood, Phillips Creek Ranch, Newman Village. ZIP codes in our service area include 75033, 75034, 75035, 75036. Contact our Frisco team to confirm your address and appointment.
Who do I call about patio and pool deck coating in Frisco?
Contact Slabbr's Frisco team at (214) 233-6712. Send your Frisco address, approximate area and photos so we can review the patio and pool deck coating scope.
Patios and pool decks nearby
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Frisco.