Skip to content

TODAY ONLY: Save $250 when you call or get your quote by text

Ends midnight CT

Call (903) 243-9525
Slabbr

Tarrant County, Texas

Patio and Pool Deck Coating in Southlake, TX

Patio and Pool Deck Coating in Southlake, TX costs $8–$10 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Southlake sits about 32 miles from the Burleson shop, roughly 35 minutes with a trailer.

$8–$10 per square foot in Southlake; final scope after assessment

  • Coating preparation: diamond ground, never acid etched
  • Schedule and return to use confirmed with your scope
  • Exterior coatings carry a 10-year warranty.
  • Written fixed price, no sales visit needed

See your price

Two taps gets you the number. Nobody asks who you are first.

About 440 sq ft. The most common garage in Texas.. No sales visit required to see the number.

Photo: Matheus Bertelli / Pexels

35 minutes from the shop

Patios and pool decks on Southlake slabs

In Southlake this is patio and pool deck coatings. Housing here is large-lot custom and semi-custom homes built almost entirely between 1993 and 2010, and garages are three and four-car garages, usually side-entry or courtyard-entry with circular drives, so that is the slab we are quoting against. A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty. That is the honest limit of patio and pool deck coating in Southlake, and we would rather say it here than on install day.

Drive time from our shop
35 minutes
Distance
32 miles
Burleson shop
(817) 381-9385
County
Tarrant County
ZIP codes served
76092

Service coverage in Southlake: Timarron, Carillon, Clariden Ranch, Kirkwood Hollow, Shady Oaks, Stone Lakes, Coventry Manor.

Everything we install in Southlake, TX →

The spec

What you are buying in Southlake

UV stability
Will not yellow. Non-negotiable outdoors
Slip resistance
Anti-slip additive standard, not an upsell
Surface temperature
Lighter finishes stay usable barefoot in summer
Warranty
10 years exterior

When this is the wrong call

A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.

Straight answers

Patio and Pool Deck Coating in Southlake: common questions

How much does patio and pool deck coating cost in Southlake?

Patio and Pool Deck Coating costs $8–$10 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.

What does patio and pool deck coating involve in Southlake?

Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.

When is patio and pool deck coating the wrong choice in Southlake?

A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.

What does the patio and pool deck coating specification include in Southlake?

UV stability: Will not yellow. Non-negotiable outdoors. Slip resistance: Anti-slip additive standard, not an upsell. Surface temperature: Lighter finishes stay usable barefoot in summer. Warranty: 10 years exterior.

Who is patio and pool deck coating best for in Southlake?

Pool surrounds; Covered and uncovered patios; Outdoor kitchens; Front porches and walkways. Slabbr assesses your surface and intended use before confirming the service.

How long does patio and pool deck coating take in Southlake?

Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.

Is patio and pool deck coating warrantied in Southlake?

Exterior coatings carry a 10-year warranty. The written scope specifies coverage and exclusions.

Do you use epoxy for patio and pool deck coating in Southlake?

No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.

Can you replace an existing coating with patio and pool deck coating in Southlake?

Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.

Where is patio and pool deck coating available in Southlake?

Slabbr serves Southlake, including Timarron, Carillon, Clariden Ranch. ZIP codes in our service area include 76092. Contact our Burleson team to confirm your address and appointment.

Who do I call about patio and pool deck coating in Southlake?

Contact Slabbr's Burleson team at (817) 381-9385. Send your Southlake address, approximate area and photos so we can review the patio and pool deck coating scope.

See your number in about a minute

Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Southlake.

Call now