Tarrant County, Texas
Polished Concrete in Fort Worth, TX
Polished Concrete in Fort Worth, TX costs $7–$12 per square foot. Slabbr mechanically grinds, densifies and polishes the existing concrete. This is a concrete finish, not a polyaspartic or epoxy coating. Timing is confirmed after a site assessment. Fort Worth sits about 15 miles from the Burleson shop, roughly 22 minutes with a trailer.
$7–$12 per square foot in Fort Worth; final scope after assessment
- Method matched to your concrete and intended use
- Schedule and return to use confirmed with your scope
- Ask for the warranty terms for your selected finish and written scope.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Luke Miller / Pexels
22 minutes from the shop
Polished concrete on Fort Worth slabs
In Fort Worth this is polished concrete. Housing here is spans everything from 1900s Craftsman in Fairmount to 1950s Wedgwood ranches to 2020s product in the far north Alliance corridor, and garages are single-car detached in the pre-war neighborhoods, two-car attached mid-century, three-car in the north Fort Worth master plans, so that is the slab we are quoting against. Polishing exposes whatever is in your slab, including patches, pipe chases and aggregate variation. On a poor pour it will look worse than a coating, and it cannot fix a slab that is stained through. That is the honest limit of polished concrete in Fort Worth, and we would rather say it here than on install day.
- Drive time from our shop
- 22 minutes
- Distance
- 15 miles
- Burleson shop
- (817) 381-9385
- County
- Tarrant County
- ZIP codes served
- 76109, 76116, 76132, 76133, 76107, 76244
Service coverage in Fort Worth: Wedgwood, Fairmount, Arlington Heights, Ridglea Hills, Tanglewood, Monticello, Walsh Ranch.
Everything we install in Fort Worth, TX →The spec
What you are buying in Fort Worth
- Failure mode
- None involving delamination. There is no coating
- Maintenance
- Dust mop and periodic burnish
- Gloss levels
- Matte through mirror, by grit sequence
- Install time
- Two to five days by square footage
When this is the wrong call
Polishing exposes whatever is in your slab, including patches, pipe chases and aggregate variation. On a poor pour it will look worse than a coating, and it cannot fix a slab that is stained through.
Straight answers
Polished Concrete in Fort Worth: common questions
How much does polished concrete cost in Fort Worth?
Polished Concrete costs $7–$12 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does polished concrete involve in Fort Worth?
Slabbr mechanically grinds, densifies and polishes the existing concrete. This is a concrete finish, not a polyaspartic or epoxy coating.
When is polished concrete the wrong choice in Fort Worth?
Polishing exposes whatever is in your slab, including patches, pipe chases and aggregate variation. On a poor pour it will look worse than a coating, and it cannot fix a slab that is stained through.
What does the polished concrete specification include in Fort Worth?
Failure mode: None involving delamination. There is no coating. Maintenance: Dust mop and periodic burnish. Gloss levels: Matte through mirror, by grit sequence. Install time: Two to five days by square footage.
Who is polished concrete best for in Fort Worth?
Warehouses and distribution; Retail and showrooms; Modern residential interiors; Anywhere forklift traffic would chew a coating. Slabbr assesses your surface and intended use before confirming the service.
How long does polished concrete take in Fort Worth?
Install time: Two to five days by square footage. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is polished concrete warrantied in Fort Worth?
Ask for the warranty terms for your selected finish and written scope. The written scope specifies coverage and exclusions.
Where is polished concrete available in Fort Worth?
Slabbr serves Fort Worth, including Wedgwood, Fairmount, Arlington Heights. ZIP codes in our service area include 76109, 76116, 76132, 76133, 76107, 76244. Contact our Burleson team to confirm your address and appointment.
Who do I call about polished concrete in Fort Worth?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Fort Worth address, approximate area and photos so we can review the polished concrete scope.
Polished concrete nearby
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Fort Worth.