Dallas Fort Worth

Polished Concrete in Dallas Fort Worth

Polished concrete costs $7 to $12 per square foot and has no coating to fail. The slab is mechanically ground through progressive diamond grits, chemically densified and burnished to a gloss, so the finished floor is the concrete itself. Nothing can delaminate because nothing was added.

$7–$12 per square foot

See my price (903) 243-9525

Method matched to your concrete and intended use
Schedule and return to use confirmed with your scope
Ask for the warranty terms for your selected finish and written scope.
Written fixed price, no sales visit needed

See your price

Two taps gets you the number. Nobody asks who you are first.

Photo: Luke Miller / Pexels

The spec

What you are actually buying

Failure mode: None involving delamination. There is no coating
Maintenance: Dust mop and periodic burnish
Gloss levels: Matte through mirror, by grit sequence
Install time: Two to five days by square footage

Right for

Where this system belongs

Warehouses and distribution
Retail and showrooms
Modern residential interiors
Anywhere forklift traffic would chew a coating

When this is the wrong call

Polishing exposes whatever is in your slab, including patches, pipe chases and aggregate variation. On a poor pour it will look worse than a coating, and it cannot fix a slab that is stained through.

No Coating to Fail

Polished concrete runs $7 to $12 per square foot, and it is the one floor we sell with nothing on it that can peel. The slab itself is ground through progressively finer diamond grits, hardened with a chemical densifier, and burnished to the gloss level you choose. The finished surface is your concrete, made dense and reflective, not a film sitting on top of it.

The price band tracks gloss level and slab condition. A low-sheen grind on a sound slab prices near $7. A high-gloss polish with heavy prep, patching, or aggregate exposure control pushes toward $12. Volume pricing applies past 2,000 square feet, which is why polished concrete is a mainstay in showrooms, offices, and retail floors that want a finished look without a coating's maintenance cycle.

What Polishing Exposes, Honestly

Polishing reveals your slab, it does not cover it. Old patches, pipe chases, differences in aggregate, and past repairs all become part of the finished floor, sometimes attractively, sometimes not. On a clean, well-poured slab that history reads as character. On a patchwork pour it reads as a patchwork pour with a shine on it, and we will tell you that at the estimate before you spend a dollar.

The other honest limit is chemistry. Polished concrete is densified, not sealed against acids, so oil and harsh chemicals left sitting can etch or stain it. In a working garage bay or a commercial kitchen, a coating or urethane system is the better tool. Where polish wins is open interior space with foot and cart traffic, where its hard, dust-free surface outlasts any film because there is no film.

Install, Cure, and Upkeep

A polished floor goes into service fast because there is no coating cure to wait on. The grind, densify, and burnish sequence runs zone by zone, and commercial spaces stay open around it: nights, weekends, and phased sections, the same scheduling we run on coating work. Dust stays in the machines, because every grinding pass runs under HEPA extraction.

Upkeep is a dust mop, a neutral cleaner, and an occasional re-burnish as traffic dulls the sheen, typically years apart rather than months. No recoat cycle, no peeling risk, no wax. Spills still get wiped promptly, since the surface is dense but not chemical-proof. Commercial installs carry a 2 year warranty, pricing is published, and the estimate is free.

Track record

Our crew has earned 150+ five-star reviews coating North Texas floors since 2019

Slabbr is a new name on the truck. The crew, the equipment and the standards behind it have been coating slabs across North Texas for years. Here is what that looks like in practice.

150+: Five-star reviews earned by this crew; coating North Texas floors since 2019
7: Years coating North Texas slabs; same crew, same equipment
Lifetime: Warranty on interior floors; attached to the job, no registration
Identical: Price on the quote vs the invoice; crack repair already included

Want to talk to someone who has stood on one of our floors? Ask on the call and we will put you in touch. Reach us at (903) 243-9525.

Straight answers

Polished Concrete: the questions we get asked

How much does polished concrete cost?

Polished Concrete costs $7–$12 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.

What does polished concrete involve?

Slabbr mechanically grinds, densifies and polishes the existing concrete. This is a concrete finish, not a polyaspartic or epoxy coating.

When is polished concrete the wrong choice?

Polishing exposes whatever is in your slab, including patches, pipe chases and aggregate variation. On a poor pour it will look worse than a coating, and it cannot fix a slab that is stained through.

What does the polished concrete specification include?

Failure mode: None involving delamination. There is no coating. Maintenance: Dust mop and periodic burnish. Gloss levels: Matte through mirror, by grit sequence. Install time: Two to five days by square footage.

Who is polished concrete best for?

Warehouses and distribution; Retail and showrooms; Modern residential interiors; Anywhere forklift traffic would chew a coating. Slabbr assesses your surface and intended use before confirming the service.

How long does polished concrete take?

Install time: Two to five days by square footage. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.