Skip to content

TODAY ONLY: Save $250 when you call or get your quote by text

Ends midnight CT

Call (903) 243-9525
Slabbr

Tarrant County, Texas

Polyaspartic Garage Floor Coating in Arlington, TX

Polyaspartic Garage Floor Coating in Arlington, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. We are 28 minutes from Arlington, running out of our shop in Burleson.

$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Arlington; final scope after assessment

  • Coating preparation: diamond ground, never acid etched
  • Most garage coatings: one day install, park after 72 hours
  • Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
  • Written fixed price, no sales visit needed

See your price

Two taps gets you the number. Nobody asks who you are first.

About 440 sq ft. The most common garage in Texas.. No sales visit required to see the number.

Photo: Jae Park / Pexels

28 minutes from the shop

Polyaspartic on Arlington slabs

In Arlington this is the full polyaspartic build. Housing here is heavy 1965-1985 build-out across the middle of the city, with south Arlington filling in 1990-2005 and Viridian adding new product on the north side, and garages are two-car attached dominates; 1960s sections often have narrow 18-foot-wide bays that limit vehicle fit, so that is the slab we are quoting against. Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it. That is the honest limit of polyaspartic garage floor coating in Arlington, and we would rather say it here than on install day.

Drive time from our shop
28 minutes
Distance
22 miles
Burleson shop
(817) 381-9385
County
Tarrant County
ZIP codes served
76001, 76002, 76006, 76012, 76013, 76017

Service coverage in Arlington: Viridian, Interlochen West, Woodland West Estates, Park Springs, River Legacy Estates, Rush Creek Ranch Estates, Fannin Farm West.

Everything we install in Arlington, TX →

Arlington pricing

What a Arlington floor costs

$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Arlington. Same price as at the shop. We are 28 minutes from Arlington, running out of our shop in Burleson. All three builds compared, layer by layer.

The spec

What you are buying in Arlington

Cure to foot traffic
A few hours
Cure to vehicle traffic
72 hours
UV stability
Will not amber or yellow
Hot tire pickup
Fully resistant
Expected life
20 years plus

When this is the wrong call

Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.

Straight answers

Polyaspartic Garage Floor Coating in Arlington: common questions

How much does polyaspartic garage floor coating cost in Arlington?

Polyaspartic Garage Floor Coating costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.

What does polyaspartic garage floor coating involve in Arlington?

Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.

When is polyaspartic garage floor coating the wrong choice in Arlington?

Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.

What does the polyaspartic garage floor coating specification include in Arlington?

Cure to foot traffic: A few hours. Cure to vehicle traffic: 72 hours. UV stability: Will not amber or yellow. Hot tire pickup: Fully resistant. Expected life: 20 years plus.

Who is polyaspartic garage floor coating best for in Arlington?

West and south facing garages that bake; Anyone who parks a car in hot after a summer drive; Fast turnarounds where the garage cannot sit for a week. Slabbr assesses your surface and intended use before confirming the service.

How long does polyaspartic garage floor coating take in Arlington?

Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.

Is polyaspartic garage floor coating warrantied in Arlington?

Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.

Do you use epoxy for polyaspartic garage floor coating in Arlington?

No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.

Can you replace an existing coating with polyaspartic garage floor coating in Arlington?

Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.

Which garage coating builds are available in Arlington?

Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.

Where is polyaspartic garage floor coating available in Arlington?

Slabbr serves Arlington, including Viridian, Interlochen West, Woodland West Estates. ZIP codes in our service area include 76001, 76002, 76006, 76012, 76013, 76017. Contact our Burleson team to confirm your address and appointment.

Who do I call about polyaspartic garage floor coating in Arlington?

Contact Slabbr's Burleson team at (817) 381-9385. Send your Arlington address, approximate area and photos so we can review the polyaspartic garage floor coating scope.

See your number in about a minute

Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Arlington.

Call now