Skip to content

TODAY ONLY: Save $250 when you call or get your quote by text

Ends midnight CT

Call (903) 243-9525
Slabbr

Dallas County, Texas

Polyaspartic Garage Floor Coating in Grand Prairie, TX

Polyaspartic Garage Floor Coating in Grand Prairie, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. Grand Prairie sits about 30 miles from the Burleson shop, roughly 35 minutes with a trailer.

$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Grand Prairie; final scope after assessment

  • Coating preparation: diamond ground, never acid etched
  • Most garage coatings: one day install, park after 72 hours
  • Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
  • Written fixed price, no sales visit needed

See your price

Two taps gets you the number. Nobody asks who you are first.

About 440 sq ft. The most common garage in Texas.. No sales visit required to see the number.

Photo: Jae Park / Pexels

35 minutes from the shop

Polyaspartic on Grand Prairie slabs

In Grand Prairie this is the full polyaspartic build. Housing here is 1950s-70s in the original north end near Main Street, with the entire south end built out 1998-2015 around Joe Pool Lake, and garages are two-car front-entry in the south end master plans, one-car and carports common in the older north sections, so that is the slab we are quoting against. Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it. That is the honest limit of polyaspartic garage floor coating in Grand Prairie, and we would rather say it here than on install day.

Drive time from our shop
35 minutes
Distance
30 miles
Burleson shop
(817) 381-9385
County
Dallas County
ZIP codes served
75050, 75051, 75052, 75054

Service coverage in Grand Prairie: Mira Lagos, Grand Peninsula, Lake Parks, Westchester, Silverbrook, Coronado Forest, Kirby Creek Village.

Everything we install in Grand Prairie, TX →

Grand Prairie pricing

What a Grand Prairie floor costs

$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Grand Prairie. Same price as at the shop. Grand Prairie sits about 30 miles from the Burleson shop, roughly 35 minutes with a trailer. All three builds compared, layer by layer.

The spec

What you are buying in Grand Prairie

Cure to foot traffic
A few hours
Cure to vehicle traffic
72 hours
UV stability
Will not amber or yellow
Hot tire pickup
Fully resistant
Expected life
20 years plus

When this is the wrong call

Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.

Straight answers

Polyaspartic Garage Floor Coating in Grand Prairie: common questions

How much does polyaspartic garage floor coating cost in Grand Prairie?

Polyaspartic Garage Floor Coating costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.

What does polyaspartic garage floor coating involve in Grand Prairie?

Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.

When is polyaspartic garage floor coating the wrong choice in Grand Prairie?

Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.

What does the polyaspartic garage floor coating specification include in Grand Prairie?

Cure to foot traffic: A few hours. Cure to vehicle traffic: 72 hours. UV stability: Will not amber or yellow. Hot tire pickup: Fully resistant. Expected life: 20 years plus.

Who is polyaspartic garage floor coating best for in Grand Prairie?

West and south facing garages that bake; Anyone who parks a car in hot after a summer drive; Fast turnarounds where the garage cannot sit for a week. Slabbr assesses your surface and intended use before confirming the service.

How long does polyaspartic garage floor coating take in Grand Prairie?

Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.

Is polyaspartic garage floor coating warrantied in Grand Prairie?

Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.

Do you use epoxy for polyaspartic garage floor coating in Grand Prairie?

No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.

Can you replace an existing coating with polyaspartic garage floor coating in Grand Prairie?

Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.

Which garage coating builds are available in Grand Prairie?

Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.

Where is polyaspartic garage floor coating available in Grand Prairie?

Slabbr serves Grand Prairie, including Mira Lagos, Grand Peninsula, Lake Parks. ZIP codes in our service area include 75050, 75051, 75052, 75054. Contact our Burleson team to confirm your address and appointment.

Who do I call about polyaspartic garage floor coating in Grand Prairie?

Contact Slabbr's Burleson team at (817) 381-9385. Send your Grand Prairie address, approximate area and photos so we can review the polyaspartic garage floor coating scope.

See your number in about a minute

Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Grand Prairie.

Call now