Dallas County, Texas
Polyaspartic Garage Floor Coating in Rowlett, TX
Polyaspartic Garage Floor Coating in Rowlett, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. Our crews reach Rowlett in about 55 minutes, so a Rowlett floor is a normal working day and not a road trip.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Rowlett; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Jae Park / Pexels
55 minutes from the shop
Polyaspartic on Rowlett slabs
In Rowlett this is the full polyaspartic build. Housing here is 1980s and 1990s lakefront and near-lake subdivisions with 2000s infill and post-2015 rebuilding along the 2015 tornado path, and garages are two-car front-entry with three-car and boat-depth bays common in the peninsula neighborhoods, so that is the slab we are quoting against. Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it. That is the honest limit of polyaspartic garage floor coating in Rowlett, and we would rather say it here than on install day.
- Drive time from our shop
- 55 minutes
- Distance
- 52 miles
- Burleson shop
- (817) 381-9385
- County
- Dallas County
- ZIP codes served
- 75088, 75089
Service coverage in Rowlett: Waterview, The Peninsula, Bayside, Spinnaker Cove, Enclave at Liberty Grove, Mariners Cove, Lakeshore Park Estates.
Everything we install in Rowlett, TX →Rowlett pricing
What a Rowlett floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Rowlett. Same price as at the shop. Our crews reach Rowlett in about 55 minutes, so a Rowlett floor is a normal working day and not a road trip. All three builds compared, layer by layer.
The spec
What you are buying in Rowlett
- Cure to foot traffic
- A few hours
- Cure to vehicle traffic
- 72 hours
- UV stability
- Will not amber or yellow
- Hot tire pickup
- Fully resistant
- Expected life
- 20 years plus
When this is the wrong call
Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.
Straight answers
Polyaspartic Garage Floor Coating in Rowlett: common questions
How much does polyaspartic garage floor coating cost in Rowlett?
Polyaspartic Garage Floor Coating costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does polyaspartic garage floor coating involve in Rowlett?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is polyaspartic garage floor coating the wrong choice in Rowlett?
Polyaspartic has a short working window and is unforgiving of a bad pour. It is the wrong product for a homeowner with a kit from a big-box store and a free Saturday, and it is the wrong product for a crew that has never run it.
What does the polyaspartic garage floor coating specification include in Rowlett?
Cure to foot traffic: A few hours. Cure to vehicle traffic: 72 hours. UV stability: Will not amber or yellow. Hot tire pickup: Fully resistant. Expected life: 20 years plus.
Who is polyaspartic garage floor coating best for in Rowlett?
West and south facing garages that bake; Anyone who parks a car in hot after a summer drive; Fast turnarounds where the garage cannot sit for a week. Slabbr assesses your surface and intended use before confirming the service.
How long does polyaspartic garage floor coating take in Rowlett?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is polyaspartic garage floor coating warrantied in Rowlett?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for polyaspartic garage floor coating in Rowlett?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with polyaspartic garage floor coating in Rowlett?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Rowlett?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is polyaspartic garage floor coating available in Rowlett?
Slabbr serves Rowlett, including Waterview, The Peninsula, Bayside. ZIP codes in our service area include 75088, 75089. Contact our Burleson team to confirm your address and appointment.
Who do I call about polyaspartic garage floor coating in Rowlett?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Rowlett address, approximate area and photos so we can review the polyaspartic garage floor coating scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Rowlett.