Denton County, Texas
Quartz Epoxy Floor Alternative in Carrollton, TX
Quartz Epoxy Systems in Carrollton, TX costs $10 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. We are 45 minutes from Carrollton, running out of our shop in Burleson.
$10 per square foot in Carrollton; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Wyxina Tresse / Pexels
45 minutes from the shop
Quartz on Carrollton slabs
In Carrollton this is quartz broadcast systems. Housing here is a historic 1900s downtown square with the bulk of the city built 1975-1995 and a 2010s wave of transit-oriented infill, and garages are two-car attached front-entry, with rear alley entry common in the 1980s Rosemeade sections, so that is the slab we are quoting against. Quartz is aggressive underfoot. In a residential garage where nobody is barefoot and nobody is wet, it is texture you will feel every time you sweep and will not thank us for. That is the honest limit of quartz epoxy systems in Carrollton, and we would rather say it here than on install day.
- Drive time from our shop
- 45 minutes
- Distance
- 42 miles
- Burleson shop
- (817) 381-9385
- County
- Denton County
- ZIP codes served
- 75006, 75007, 75010
Service coverage in Carrollton: Josey Ranch, Rosemeade, Mustang Park, Arbor Creek, Country Place, Trails at Arbor Hills, Indian Creek.
Everything we install in Carrollton, TX →The spec
What you are buying in Carrollton
- Slip resistance
- Highest of any system we install
- Cleanability
- Seamless and non-porous, washdown safe
- Build thickness
- Heavier than a flake system
- Install time
- Two to three days depending on coving
When this is the wrong call
Quartz is aggressive underfoot. In a residential garage where nobody is barefoot and nobody is wet, it is texture you will feel every time you sweep and will not thank us for.
Straight answers
Quartz Epoxy Systems in Carrollton: common questions
How much does quartz epoxy systems cost in Carrollton?
Quartz Epoxy Systems costs $10 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does quartz epoxy systems involve in Carrollton?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is quartz epoxy systems the wrong choice in Carrollton?
Quartz is aggressive underfoot. In a residential garage where nobody is barefoot and nobody is wet, it is texture you will feel every time you sweep and will not thank us for.
What does the quartz epoxy systems specification include in Carrollton?
Slip resistance: Highest of any system we install. Cleanability: Seamless and non-porous, washdown safe. Build thickness: Heavier than a flake system. Install time: Two to three days depending on coving.
Who is quartz epoxy systems best for in Carrollton?
Pool decks and wet areas; Commercial kitchens; Locker rooms and showers; Entry ramps and loading areas. Slabbr assesses your surface and intended use before confirming the service.
How long does quartz epoxy systems take in Carrollton?
Install time: Two to three days depending on coving. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is quartz epoxy systems warrantied in Carrollton?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for quartz epoxy systems in Carrollton?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with quartz epoxy systems in Carrollton?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is quartz epoxy systems available in Carrollton?
Slabbr serves Carrollton, including Josey Ranch, Rosemeade, Mustang Park. ZIP codes in our service area include 75006, 75007, 75010. Contact our Burleson team to confirm your address and appointment.
Who do I call about quartz epoxy systems in Carrollton?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Carrollton address, approximate area and photos so we can review the quartz epoxy systems scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Carrollton.