Denton County, Texas
Solid Color Epoxy Floor Alternative in Flower Mound, TX
Solid Color Epoxy in Flower Mound, TX costs $6 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Contact Slabbr's Burleson team at (817) 381-9385 to confirm the job address, access and appointment. A city listing is not an arrival-time guarantee.
$6 per square foot in Flower Mound; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
Your Burleson contact
Solid color on Flower Mound slabs
Solid Color Epoxy in Flower Mound starts with the actual property and intended use. Record the existing finish, visible cracks, moisture history and desired appearance. Include door thresholds and any storage that must be removed before work starts. A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice. Contact the Burleson team with the address and photos for a measured scope.
- Appointment
- Confirmed for your address
- Burleson contact
- (817) 381-9385
- County
- Denton County
- ZIP codes served
- 75022, 75028
Confirm the complete Flower Mound job address and the requested service before scheduling. Listed ZIP codes are planning references, not a promise of availability at every property.
Everything we install in Flower Mound, TX →The spec
What you are buying in Flower Mound
- Colors
- Hundreds, matched to standard color decks
- Install time
- One day
- Maintenance
- Shows dust faster than flake, cleans just as easily
When this is the wrong call
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
Straight answers
Solid Color Epoxy in Flower Mound: common questions
How much does solid color epoxy cost in Flower Mound?
Solid Color Epoxy costs $6 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does solid color epoxy involve in Flower Mound?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is solid color epoxy the wrong choice in Flower Mound?
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
What does the solid color epoxy specification include in Flower Mound?
Colors: Hundreds, matched to standard color decks. Install time: One day. Maintenance: Shows dust faster than flake, cleans just as easily.
Who is solid color epoxy best for in Flower Mound?
Workshops and storage buildings; Rental properties; Commercial back-of-house; Anywhere a busy pattern would fight the space. Slabbr assesses your surface and intended use before confirming the service.
How long does solid color epoxy take in Flower Mound?
Install time: One day. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is solid color epoxy warrantied in Flower Mound?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for solid color epoxy in Flower Mound?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with solid color epoxy in Flower Mound?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is solid color epoxy available in Flower Mound?
Slabbr serves Flower Mound, including Bridlewood, Wellington, Canyon Falls. ZIP codes in our service area include 75022, 75028. Contact our Burleson team to confirm your address and appointment.
Who do I call about solid color epoxy in Flower Mound?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Flower Mound address, approximate area and photos so we can review the solid color epoxy scope.
What to confirm before your Flower Mound quote
- The desired color and gloss in the actual room lighting
- How visible slab repairs and floor wear may affect the result
- Traffic and cleaning requirements for the proposed finish
Send photographs and the complete job address when requesting your estimate. Slabbr confirms the measured scope, preparation or mounting conditions, schedule and applicable written terms before booking.
Solid color nearby
Also in Flower Mound
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Flower Mound.
