Denton County, Texas
Solid Color Epoxy Floor Alternative in The Colony, TX
Solid Color Epoxy in The Colony, TX costs $6 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. The Colony sits about 22 miles from the Celina shop, roughly 40 minutes with a trailer.
$6 per square foot in The Colony; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
40 minutes from the shop
Solid color on The Colony slabs
In The Colony this is solid color floors. Housing here is a 1975-1990 first generation of starter homes, with The Tribute and Fairwater adding upscale lakefront product since 2005, and garages are single and two-car attached in the original sections, three-car in The Tribute, so that is the slab we are quoting against. A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice. That is the honest limit of solid color epoxy in The Colony, and we would rather say it here than on install day.
- Drive time from our shop
- 40 minutes
- Distance
- 22 miles
- Celina shop
- (903) 243-9525
- County
- Denton County
- ZIP codes served
- 75056
Service coverage in The Colony: Ridgepointe, Northpointe, Legend Crest, Legend Bend, Fairwater, The Tribute.
Everything we install in The Colony, TX →The spec
What you are buying in The Colony
- Colors
- Hundreds, matched to standard color decks
- Install time
- One day
- Maintenance
- Shows dust faster than flake, cleans just as easily
When this is the wrong call
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
Straight answers
Solid Color Epoxy in The Colony: common questions
How much does solid color epoxy cost in The Colony?
Solid Color Epoxy costs $6 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does solid color epoxy involve in The Colony?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is solid color epoxy the wrong choice in The Colony?
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
What does the solid color epoxy specification include in The Colony?
Colors: Hundreds, matched to standard color decks. Install time: One day. Maintenance: Shows dust faster than flake, cleans just as easily.
Who is solid color epoxy best for in The Colony?
Workshops and storage buildings; Rental properties; Commercial back-of-house; Anywhere a busy pattern would fight the space. Slabbr assesses your surface and intended use before confirming the service.
How long does solid color epoxy take in The Colony?
Install time: One day. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is solid color epoxy warrantied in The Colony?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for solid color epoxy in The Colony?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with solid color epoxy in The Colony?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is solid color epoxy available in The Colony?
Slabbr serves The Colony, including Ridgepointe, Northpointe, Legend Crest. ZIP codes in our service area include 75056. Contact our Celina team to confirm your address and appointment.
Who do I call about solid color epoxy in The Colony?
Contact Slabbr's Celina team at (903) 243-9525. Send your The Colony address, approximate area and photos so we can review the solid color epoxy scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in The Colony.