Grayson County, Texas
Concrete Coatings and Garage Storage in Van Alstyne, TX
Slabbr offers concrete coatings and garage storage in Van Alstyne, TX, through our Celina team. Garage coating builds use polyaspartic base and top coats and run $2,650–$4,400 for 440 square feet, from Slabbr One through Ironclad. Most garage coatings take one day.
440 sq ft garage builds: $2,650–$4,400, One through Ironclad
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Lifetime residential garage coating warranty
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Diego Ramirez / Pexels
Local conditions
Van Alstyne slabs, specifically
Most of what we coat in Van Alstyne is an 1873 railroad townsite core around Waco and Jefferson streets, a ring of late-1990s subdivisions, and a post-2015 production-builder wave that now dominates. That matters because slab age tells us what we are walking into before we get there. We work Mantua Point, Thompson Farms, Georgetown Estates and Greywood Heights regularly, and the garages in Van Alstyne are overwhelmingly two-car front-entry on lots around 7,800 sq ft, with three-car and tandem bays in the larger Mantua Point and Thompson Farms sections, and detached garages with gravel drives in the pre-war core off Waco Street.
Centurion American has a 667-acre, 2,000-home development approved at the Grayson and Collin county line, and TxDOT has begun early work widening US-75 through town, so a lot of these slabs are new pours that have never been coated. Van Alstyne is in Grayson County, population about 5,952.
What we install in Van Alstyne
Every system, priced in the open
Residential
Garage Floor Coating in Van Alstyne
From $6 to $10 per sq ft
Polyaspartic Garage Floor Coating in Van Alstyne
From $8 to $10 per sq ft
Epoxy Flooring in Van Alstyne
From $6 to $12 per sq ft
Metallic Epoxy Floors in Van Alstyne
From $12 per sq ft
Quartz Epoxy Systems in Van Alstyne
From $10 per sq ft
Solid Color Epoxy in Van Alstyne
From $6 per sq ft
Stained and Sealed Concrete in Van Alstyne
From $4 per sq ft
Polished Concrete in Van Alstyne
From $7 to $12 per sq ft
Grind and Seal Concrete in Van Alstyne
From $4 per sq ft
Garage Organization in Van Alstyne
Clear the Floor from $2,150
Garage Slatwall in Van Alstyne
$14 per sq ft of wall
Overhead Garage Storage in Van Alstyne
$399 per 4×8 rack
Garage Cabinets in Van Alstyne
From $3,695 after measure
Outdoor
Commercial and industrial
Commercial Epoxy Flooring in Van Alstyne
From $4 to $12 per sq ft
Warehouse and Industrial Floor Coating in Van Alstyne
From $4 to $9 per sq ft
Auto Shop Floor Coating in Van Alstyne
From $6 to $10 per sq ft
Commercial Kitchen Flooring in Van Alstyne
From $8 to $14 per sq ft
Hangar Floor Coating in Van Alstyne
From $5 to $9 per sq ft
All three builds compared: pricing. How install day runs: our process. What is covered and for how long: the warranty. The standards we prep to: ASTM and ICRI.
Track record
Our crew has earned 150+ five-star reviews coating North Texas floors since 2019
Slabbr is a new name on the truck. The crew, the equipment and the standards behind it have been coating slabs across North Texas for years. Here is what that looks like in practice.
- 150+
- Five-star reviews earned by this crew
- coating North Texas floors since 2019
- 7
- Years coating North Texas slabs
- same crew, same equipment
- Lifetime
- Warranty on interior floors
- attached to the job, no registration
- Identical
- Price on the quote vs the invoice
- crack repair already included
Want to talk to someone who has stood on one of our floors? Ask on the call and we will put you in touch. Reach us at (903) 243-9525.
Straight answers
Coating a floor in Van Alstyne: common questions
Does Slabbr coat floors in Van Alstyne, TX?
Yes. Our crews reach Van Alstyne in about 35 minutes, so a Van Alstyne floor is a normal working day and not a road trip. We offer 21 coating, concrete-care and garage-storage services with published pricing.
How much does a garage floor coating cost in Van Alstyne?
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Van Alstyne. Crack and joint repair is included in all three.
Which Van Alstyne zip codes do you serve?
75495, all in Grayson County. Service coverage includes these neighborhoods in Van Alstyne: Mantua Point, Thompson Farms, Georgetown Estates, Greywood Heights, Steeplechase, Chapel Creek Farms.
What are Van Alstyne slabs usually like?
Housing in Van Alstyne is an 1873 railroad townsite core around Waco and Jefferson streets, a ring of late-1990s subdivisions, and a post-2015 production-builder wave that now dominates. Building age is only background information. We inspect the actual slab, moisture and existing finish before confirming preparation.
What kind of garages does Van Alstyne have?
overwhelmingly two-car front-entry on lots around 7,800 sq ft, with three-car and tandem bays in the larger Mantua Point and Thompson Farms sections, and detached garages with gravel drives in the pre-war core off Waco Street. Centurion American has a 667-acre, 2,000-home development approved at the Grayson and Collin county line, and TxDOT has begun early work widening US-75 through town, so a lot of these slabs are new pours that have never been coated.
Do you charge extra to drive to Van Alstyne?
No. Our crews reach Van Alstyne in about 35 minutes, so a Van Alstyne floor is a normal working day and not a road trip. We do not add a travel premium, or quote higher in the Van Alstyne zip codes with bigger houses.
Do you install epoxy in Van Alstyne?
No. Our coating systems use polyaspartic base and top coats. Polishing, staining and sealing, and cleaning are separate services with their own methods.
How long does a garage coating install take in Van Alstyne?
Most garage coatings take one day on the slab. Grinding, crack repair and coating all happen in the same visit. Walk on it after 24 hours in Van Alstyne, park on it after 72.
Is a Van Alstyne floor warrantied?
Residential garage coatings in Van Alstyne carry a lifetime warranty against delamination, peeling and flaking for as long as you own the home. Exterior work carries 10 years and commercial 2 years.
My Van Alstyne floor already has a failed coating. Can you fix it?
Yes. We grind the old coating off first. Removal adds 1.75 per square foot to the Van Alstyne quote and is priced up front rather than discovered on install day.
Who runs Van Alstyne jobs?
The Celina shop. That number is (903) 243-9525, and it is the same number listed on that location's Google Business Profile.
Straight answers, real numbers
Homework before you hire in Van Alstyne

Aug 31, 2026
The 5 Garage Floor Coating Warranty Exclusions That Cancel the Claim You Would Actually File

Aug 29, 2026
The Sign-Today Discount, Decoded: How Garage Floor Sales Tactics Work

Aug 28, 2026
Compare Garage Floor Coating Quotes Before You Book

Aug 27, 2026
Bubbles in a New Epoxy Floor: Outgassing or Moisture, and Why the Wrong Diagnosis Fails Twice
What we install in Van Alstyne
- Garage Floor Coating in Van Alstyne
- Polyaspartic Garage Floor Coating in Van Alstyne
- Epoxy Flooring in Van Alstyne
- Metallic Epoxy Floors in Van Alstyne
- Quartz Epoxy Systems in Van Alstyne
- Solid Color Epoxy in Van Alstyne
- Stained and Sealed Concrete in Van Alstyne
- Polished Concrete in Van Alstyne
- Patio and Pool Deck Coating in Van Alstyne
- Driveway Coating in Van Alstyne
- Commercial Epoxy Flooring in Van Alstyne
- Warehouse and Industrial Floor Coating in Van Alstyne
- Auto Shop Floor Coating in Van Alstyne
- Commercial Kitchen Flooring in Van Alstyne
- Hangar Floor Coating in Van Alstyne
- Grind and Seal Concrete in Van Alstyne
- Pressure Washing in Van Alstyne
- Garage Organization in Van Alstyne
- Garage Slatwall in Van Alstyne
- Overhead Garage Storage in Van Alstyne
- Garage Cabinets in Van Alstyne
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Van Alstyne.
