Johnson County, Texas
Driveway Coating in Cleburne, TX
Driveway Coating in Cleburne, TX costs $8–$10 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Our crews reach Cleburne in about 22 minutes, so a Cleburne floor is a normal working day and not a road trip.
$8–$10 per square foot in Cleburne; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Exterior coatings carry a 10-year warranty.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Thomas P / Pexels
22 minutes from the shop
Driveways on Cleburne slabs
In Cleburne this is driveway coatings. Housing here is a deep stock of 1920s-1950s bungalows near the courthouse square, with 2015-present growth on the north and west edges, and garages are detached single-car rear garages downtown, two-car attached in the newer north-side subdivisions, so that is the slab we are quoting against. Driveways with severe spalling, exposed rebar or sections that have dropped need concrete work, not a coating. We will quote the repair honestly or tell you to replace the section. That is the honest limit of driveway coating in Cleburne, and we would rather say it here than on install day.
- Drive time from our shop
- 22 minutes
- Distance
- 18 miles
- Burleson shop
- (817) 381-9385
- County
- Johnson County
- ZIP codes served
- 76031, 76033
Service coverage in Cleburne: Burgess Meadows, Baker Farms, Courtland Place, Chisholm Hills, Trail Creek, Belle Lagos, Sunset Ridge.
Everything we install in Cleburne, TX →The spec
What you are buying in Cleburne
- UV stability
- Required. No epoxy on a driveway
- Freeze-thaw
- Flexible system, moves with the slab
- Install time
- One to two days
- Warranty
- 10 years exterior
When this is the wrong call
Driveways with severe spalling, exposed rebar or sections that have dropped need concrete work, not a coating. We will quote the repair honestly or tell you to replace the section.
Straight answers
Driveway Coating in Cleburne: common questions
How much does driveway coating cost in Cleburne?
Driveway Coating costs $8–$10 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does driveway coating involve in Cleburne?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is driveway coating the wrong choice in Cleburne?
Driveways with severe spalling, exposed rebar or sections that have dropped need concrete work, not a coating. We will quote the repair honestly or tell you to replace the section.
What does the driveway coating specification include in Cleburne?
UV stability: Required. No epoxy on a driveway. Freeze-thaw: Flexible system, moves with the slab. Install time: One to two days. Warranty: 10 years exterior.
Who is driveway coating best for in Cleburne?
Driveways that stain or dust; Curb appeal before a sale; Matching a coated garage out to the street. Slabbr assesses your surface and intended use before confirming the service.
How long does driveway coating take in Cleburne?
Install time: One to two days. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is driveway coating warrantied in Cleburne?
Exterior coatings carry a 10-year warranty. The written scope specifies coverage and exclusions.
Do you use epoxy for driveway coating in Cleburne?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with driveway coating in Cleburne?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is driveway coating available in Cleburne?
Slabbr serves Cleburne, including Burgess Meadows, Baker Farms, Courtland Place. ZIP codes in our service area include 76031, 76033. Contact our Burleson team to confirm your address and appointment.
Who do I call about driveway coating in Cleburne?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Cleburne address, approximate area and photos so we can review the driveway coating scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Cleburne.