Dallas County, Texas
Garage Floor Coating in Garland, TX
Garage Floor Coating in Garland, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. Garland sits about 45 miles from the Burleson shop, roughly 50 minutes with a trailer.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Garland; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: hi room / Pexels
50 minutes from the shop
Garage floors on Garland slabs
In Garland this is the standard flake garage floor. Housing here is heavy 1960s-1980s build-out, with the Firewheel area on the northeast side added in the late 1980s and 1990s, and garages are two-car attached front-entry is the standard, with many 1960s single-car garages converted to living space, so that is the slab we are quoting against. If your slab is actively heaving with a crack over half an inch that is still moving, a coating is cosmetic. That is a foundation conversation first, a floor conversation second, and we will tell you so on the estimate rather than take the job. That is the honest limit of garage floor coating in Garland, and we would rather say it here than on install day.
- Drive time from our shop
- 50 minutes
- Distance
- 45 miles
- Burleson shop
- (817) 381-9385
- County
- Dallas County
- ZIP codes served
- 75040, 75041, 75042, 75043, 75044
Service coverage in Garland: Firewheel Estates, Camelot, Springpark Central, Castlewood, Hills at Firewheel, Crystal Lake, Villages of Valley Creek.
Everything we install in Garland, TX →Garland pricing
What a Garland floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Garland. Same price as at the shop. Garland sits about 45 miles from the Burleson shop, roughly 50 minutes with a trailer. All three builds compared, layer by layer.
The spec
What you are buying in Garland
- Install time
- One day for most 2 and 3 car garages
- Walk on it
- 24 hours
- Park on it
- 72 hours
- Expected life
- 20 years plus on the Prime and Ironclad builds
- Warranty
- Lifetime residential
When this is the wrong call
If your slab is actively heaving with a crack over half an inch that is still moving, a coating is cosmetic. That is a foundation conversation first, a floor conversation second, and we will tell you so on the estimate rather than take the job.
Straight answers
Garage Floor Coating in Garland: common questions
How much does garage floor coating cost in Garland?
Garage Floor Coating costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does garage floor coating involve in Garland?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is garage floor coating the wrong choice in Garland?
If your slab is actively heaving with a crack over half an inch that is still moving, a coating is cosmetic. That is a foundation conversation first, a floor conversation second, and we will tell you so on the estimate rather than take the job.
What does the garage floor coating specification include in Garland?
Install time: One day for most 2 and 3 car garages. Walk on it: 24 hours. Park on it: 72 hours. Expected life: 20 years plus on the Prime and Ironclad builds. Warranty: Lifetime residential.
Who is garage floor coating best for in Garland?
Daily-driver garages; Slabs that dust or stain; Failed DIY kits that need stripping; New construction slabs past 28 days. Slabbr assesses your surface and intended use before confirming the service.
How long does garage floor coating take in Garland?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is garage floor coating warrantied in Garland?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for garage floor coating in Garland?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with garage floor coating in Garland?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Garland?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is garage floor coating available in Garland?
Slabbr serves Garland, including Firewheel Estates, Camelot, Springpark Central. ZIP codes in our service area include 75040, 75041, 75042, 75043, 75044. Contact our Burleson team to confirm your address and appointment.
Who do I call about garage floor coating in Garland?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Garland address, approximate area and photos so we can review the garage floor coating scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Garland.