Collin County, Texas
Garage Floor Coating in Murphy, TX
Garage Floor Coating in Murphy, TX costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Most garage coatings are installed in one day. Our crews reach Murphy in about 50 minutes, so a Murphy floor is a normal working day and not a road trip.
$2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad in Murphy; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: hi room / Pexels
50 minutes from the shop
Garage floors on Murphy slabs
In Murphy this is the standard flake garage floor. Housing here is an unusually tight 1999-2010 window in which the city went from farmland to essentially built out, and garages are three-car garages are the norm, frequently a two-plus-one split with separate doors, so that is the slab we are quoting against. If your slab is actively heaving with a crack over half an inch that is still moving, a coating is cosmetic. That is a foundation conversation first, a floor conversation second, and we will tell you so on the estimate rather than take the job. That is the honest limit of garage floor coating in Murphy, and we would rather say it here than on install day.
- Drive time from our shop
- 50 minutes
- Distance
- 30 miles
- Celina shop
- (903) 243-9525
- County
- Collin County
- ZIP codes served
- 75094
Service coverage in Murphy: Rolling Ridge Estates, Bluff Creek Estates, Maxwell Creek North, Murphy Farms, Hunters Landing, Aviary, Windy Hill Farms.
Everything we install in Murphy, TX →Murphy pricing
What a Murphy floor costs
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Murphy. Same price as at the shop. Our crews reach Murphy in about 50 minutes, so a Murphy floor is a normal working day and not a road trip. All three builds compared, layer by layer.
The spec
What you are buying in Murphy
- Install time
- One day for most 2 and 3 car garages
- Walk on it
- 24 hours
- Park on it
- 72 hours
- Expected life
- 20 years plus on the Prime and Ironclad builds
- Warranty
- Lifetime residential
When this is the wrong call
If your slab is actively heaving with a crack over half an inch that is still moving, a coating is cosmetic. That is a foundation conversation first, a floor conversation second, and we will tell you so on the estimate rather than take the job.
Straight answers
Garage Floor Coating in Murphy: common questions
How much does garage floor coating cost in Murphy?
Garage Floor Coating costs $2,650–$4,400 for a 440-square-foot garage, from Slabbr One through Ironclad with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does garage floor coating involve in Murphy?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is garage floor coating the wrong choice in Murphy?
If your slab is actively heaving with a crack over half an inch that is still moving, a coating is cosmetic. That is a foundation conversation first, a floor conversation second, and we will tell you so on the estimate rather than take the job.
What does the garage floor coating specification include in Murphy?
Install time: One day for most 2 and 3 car garages. Walk on it: 24 hours. Park on it: 72 hours. Expected life: 20 years plus on the Prime and Ironclad builds. Warranty: Lifetime residential.
Who is garage floor coating best for in Murphy?
Daily-driver garages; Slabs that dust or stain; Failed DIY kits that need stripping; New construction slabs past 28 days. Slabbr assesses your surface and intended use before confirming the service.
How long does garage floor coating take in Murphy?
Most garage coatings are installed in one day. Allow 24 hours before walking and 72 hours before parking, subject to the crew's return-to-use instructions.
Is garage floor coating warrantied in Murphy?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for garage floor coating in Murphy?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with garage floor coating in Murphy?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Which garage coating builds are available in Murphy?
Slabbr One: $2,650; Slabbr Prime: $3,520; Slabbr Ironclad: $4,400 for a 440-square-foot garage. Compare the layers and slab requirements before choosing a build.
Where is garage floor coating available in Murphy?
Slabbr serves Murphy, including Rolling Ridge Estates, Bluff Creek Estates, Maxwell Creek North. ZIP codes in our service area include 75094. Contact our Celina team to confirm your address and appointment.
Who do I call about garage floor coating in Murphy?
Contact Slabbr's Celina team at (903) 243-9525. Send your Murphy address, approximate area and photos so we can review the garage floor coating scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Murphy.