Johnson County, Texas
Metallic Epoxy Floor Alternative in Cleburne, TX
Metallic Epoxy Floors in Cleburne, TX costs $12 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Our crews reach Cleburne in about 22 minutes, so a Cleburne floor is a normal working day and not a road trip.
$12 per square foot in Cleburne; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Diana ✨ / Pexels
22 minutes from the shop
Metallic on Cleburne slabs
In Cleburne this is decorative metallic floors. Housing here is a deep stock of 1920s-1950s bungalows near the courthouse square, with 2015-present growth on the north and west edges, and garages are detached single-car rear garages downtown, two-car attached in the newer north-side subdivisions, so that is the slab we are quoting against. Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today. That is the honest limit of metallic epoxy floors in Cleburne, and we would rather say it here than on install day.
- Drive time from our shop
- 22 minutes
- Distance
- 18 miles
- Burleson shop
- (817) 381-9385
- County
- Johnson County
- ZIP codes served
- 76031, 76033
Service coverage in Cleburne: Burgess Meadows, Baker Farms, Courtland Place, Chisholm Hills, Trail Creek, Belle Lagos, Sunset Ridge.
Everything we install in Cleburne, TX →The spec
What you are buying in Cleburne
- Install time
- Two days for most residential spaces
- Finish
- High gloss, one of a kind
- Repeatability
- None. Every floor is unique by design
- Topcoat
- Polyaspartic wear layer over the metallic
When this is the wrong call
Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today.
Straight answers
Metallic Epoxy Floors in Cleburne: common questions
How much does metallic epoxy floors cost in Cleburne?
Metallic Epoxy Floors costs $12 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does metallic epoxy floors involve in Cleburne?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is metallic epoxy floors the wrong choice in Cleburne?
Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today.
What does the metallic epoxy floors specification include in Cleburne?
Install time: Two days for most residential spaces. Finish: High gloss, one of a kind. Repeatability: None. Every floor is unique by design. Topcoat: Polyaspartic wear layer over the metallic.
Who is metallic epoxy floors best for in Cleburne?
Showrooms and retail; Basements and finished interiors; Garages built to be looked at; Entryways and lobbies. Slabbr assesses your surface and intended use before confirming the service.
How long does metallic epoxy floors take in Cleburne?
Install time: Two days for most residential spaces. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is metallic epoxy floors warrantied in Cleburne?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for metallic epoxy floors in Cleburne?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with metallic epoxy floors in Cleburne?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is metallic epoxy floors available in Cleburne?
Slabbr serves Cleburne, including Burgess Meadows, Baker Farms, Courtland Place. ZIP codes in our service area include 76031, 76033. Contact our Burleson team to confirm your address and appointment.
Who do I call about metallic epoxy floors in Cleburne?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Cleburne address, approximate area and photos so we can review the metallic epoxy floors scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Cleburne.