Dallas County, Texas
Metallic Epoxy Floor Alternative in Garland, TX
Metallic Epoxy Floors in Garland, TX costs $12 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Garland sits about 45 miles from the Burleson shop, roughly 50 minutes with a trailer.
$12 per square foot in Garland; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Diana ✨ / Pexels
50 minutes from the shop
Metallic on Garland slabs
In Garland this is decorative metallic floors. Housing here is heavy 1960s-1980s build-out, with the Firewheel area on the northeast side added in the late 1980s and 1990s, and garages are two-car attached front-entry is the standard, with many 1960s single-car garages converted to living space, so that is the slab we are quoting against. Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today. That is the honest limit of metallic epoxy floors in Garland, and we would rather say it here than on install day.
- Drive time from our shop
- 50 minutes
- Distance
- 45 miles
- Burleson shop
- (817) 381-9385
- County
- Dallas County
- ZIP codes served
- 75040, 75041, 75042, 75043, 75044
Service coverage in Garland: Firewheel Estates, Camelot, Springpark Central, Castlewood, Hills at Firewheel, Crystal Lake, Villages of Valley Creek.
Everything we install in Garland, TX →The spec
What you are buying in Garland
- Install time
- Two days for most residential spaces
- Finish
- High gloss, one of a kind
- Repeatability
- None. Every floor is unique by design
- Topcoat
- Polyaspartic wear layer over the metallic
When this is the wrong call
Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today.
Straight answers
Metallic Epoxy Floors in Garland: common questions
How much does metallic epoxy floors cost in Garland?
Metallic Epoxy Floors costs $12 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does metallic epoxy floors involve in Garland?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is metallic epoxy floors the wrong choice in Garland?
Metallic shows tire scuff and hides nothing. In a working garage with a lift and a floor jack, a flake system will look better in five years and cost you less today.
What does the metallic epoxy floors specification include in Garland?
Install time: Two days for most residential spaces. Finish: High gloss, one of a kind. Repeatability: None. Every floor is unique by design. Topcoat: Polyaspartic wear layer over the metallic.
Who is metallic epoxy floors best for in Garland?
Showrooms and retail; Basements and finished interiors; Garages built to be looked at; Entryways and lobbies. Slabbr assesses your surface and intended use before confirming the service.
How long does metallic epoxy floors take in Garland?
Install time: Two days for most residential spaces. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is metallic epoxy floors warrantied in Garland?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for metallic epoxy floors in Garland?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with metallic epoxy floors in Garland?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is metallic epoxy floors available in Garland?
Slabbr serves Garland, including Firewheel Estates, Camelot, Springpark Central. ZIP codes in our service area include 75040, 75041, 75042, 75043, 75044. Contact our Burleson team to confirm your address and appointment.
Who do I call about metallic epoxy floors in Garland?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Garland address, approximate area and photos so we can review the metallic epoxy floors scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Garland.