Dallas County, Texas
Solid Color Epoxy Floor Alternative in Garland, TX
Solid Color Epoxy in Garland, TX costs $6 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Garland sits about 45 miles from the Burleson shop, roughly 50 minutes with a trailer.
$6 per square foot in Garland; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
50 minutes from the shop
Solid color on Garland slabs
In Garland this is solid color floors. Housing here is heavy 1960s-1980s build-out, with the Firewheel area on the northeast side added in the late 1980s and 1990s, and garages are two-car attached front-entry is the standard, with many 1960s single-car garages converted to living space, so that is the slab we are quoting against. A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice. That is the honest limit of solid color epoxy in Garland, and we would rather say it here than on install day.
- Drive time from our shop
- 50 minutes
- Distance
- 45 miles
- Burleson shop
- (817) 381-9385
- County
- Dallas County
- ZIP codes served
- 75040, 75041, 75042, 75043, 75044
Service coverage in Garland: Firewheel Estates, Camelot, Springpark Central, Castlewood, Hills at Firewheel, Crystal Lake, Villages of Valley Creek.
Everything we install in Garland, TX →The spec
What you are buying in Garland
- Colors
- Hundreds, matched to standard color decks
- Install time
- One day
- Maintenance
- Shows dust faster than flake, cleans just as easily
When this is the wrong call
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
Straight answers
Solid Color Epoxy in Garland: common questions
How much does solid color epoxy cost in Garland?
Solid Color Epoxy costs $6 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does solid color epoxy involve in Garland?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is solid color epoxy the wrong choice in Garland?
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
What does the solid color epoxy specification include in Garland?
Colors: Hundreds, matched to standard color decks. Install time: One day. Maintenance: Shows dust faster than flake, cleans just as easily.
Who is solid color epoxy best for in Garland?
Workshops and storage buildings; Rental properties; Commercial back-of-house; Anywhere a busy pattern would fight the space. Slabbr assesses your surface and intended use before confirming the service.
How long does solid color epoxy take in Garland?
Install time: One day. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is solid color epoxy warrantied in Garland?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for solid color epoxy in Garland?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with solid color epoxy in Garland?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is solid color epoxy available in Garland?
Slabbr serves Garland, including Firewheel Estates, Camelot, Springpark Central. ZIP codes in our service area include 75040, 75041, 75042, 75043, 75044. Contact our Burleson team to confirm your address and appointment.
Who do I call about solid color epoxy in Garland?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Garland address, approximate area and photos so we can review the solid color epoxy scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Garland.