Dallas County, Texas
Quartz Epoxy Floor Alternative in Garland, TX
Quartz Epoxy Systems in Garland, TX costs $10 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Garland sits about 45 miles from the Burleson shop, roughly 50 minutes with a trailer.
$10 per square foot in Garland; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Wyxina Tresse / Pexels
50 minutes from the shop
Quartz on Garland slabs
In Garland this is quartz broadcast systems. Housing here is heavy 1960s-1980s build-out, with the Firewheel area on the northeast side added in the late 1980s and 1990s, and garages are two-car attached front-entry is the standard, with many 1960s single-car garages converted to living space, so that is the slab we are quoting against. Quartz is aggressive underfoot. In a residential garage where nobody is barefoot and nobody is wet, it is texture you will feel every time you sweep and will not thank us for. That is the honest limit of quartz epoxy systems in Garland, and we would rather say it here than on install day.
- Drive time from our shop
- 50 minutes
- Distance
- 45 miles
- Burleson shop
- (817) 381-9385
- County
- Dallas County
- ZIP codes served
- 75040, 75041, 75042, 75043, 75044
Service coverage in Garland: Firewheel Estates, Camelot, Springpark Central, Castlewood, Hills at Firewheel, Crystal Lake, Villages of Valley Creek.
Everything we install in Garland, TX →The spec
What you are buying in Garland
- Slip resistance
- Highest of any system we install
- Cleanability
- Seamless and non-porous, washdown safe
- Build thickness
- Heavier than a flake system
- Install time
- Two to three days depending on coving
When this is the wrong call
Quartz is aggressive underfoot. In a residential garage where nobody is barefoot and nobody is wet, it is texture you will feel every time you sweep and will not thank us for.
Straight answers
Quartz Epoxy Systems in Garland: common questions
How much does quartz epoxy systems cost in Garland?
Quartz Epoxy Systems costs $10 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does quartz epoxy systems involve in Garland?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is quartz epoxy systems the wrong choice in Garland?
Quartz is aggressive underfoot. In a residential garage where nobody is barefoot and nobody is wet, it is texture you will feel every time you sweep and will not thank us for.
What does the quartz epoxy systems specification include in Garland?
Slip resistance: Highest of any system we install. Cleanability: Seamless and non-porous, washdown safe. Build thickness: Heavier than a flake system. Install time: Two to three days depending on coving.
Who is quartz epoxy systems best for in Garland?
Pool decks and wet areas; Commercial kitchens; Locker rooms and showers; Entry ramps and loading areas. Slabbr assesses your surface and intended use before confirming the service.
How long does quartz epoxy systems take in Garland?
Install time: Two to three days depending on coving. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is quartz epoxy systems warrantied in Garland?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for quartz epoxy systems in Garland?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with quartz epoxy systems in Garland?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is quartz epoxy systems available in Garland?
Slabbr serves Garland, including Firewheel Estates, Camelot, Springpark Central. ZIP codes in our service area include 75040, 75041, 75042, 75043, 75044. Contact our Burleson team to confirm your address and appointment.
Who do I call about quartz epoxy systems in Garland?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Garland address, approximate area and photos so we can review the quartz epoxy systems scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Garland.