Oklahoma County, Oklahoma
Patio and Pool Deck Coating in Edmond, OK
Patio and Pool Deck Coating in Edmond, OK costs $8–$10 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. We are 215 minutes from Edmond, running out of our shop in Celina.
$8–$10 per square foot in Edmond; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Exterior coatings carry a 10-year warranty.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Matheus Bertelli / Pexels
215 minutes from the shop
Patios and pool decks on Edmond slabs
In Edmond this is patio and pool deck coatings. Housing here is a post-1970 suburban explosion with a small pre-war core, the city running from 8,577 people in 1960 to 94,428 by 2020, so the bulk of the stock is 1980 to 2020 while downtown dates to the 1889 Land Run, and garages are the metro's highest-income large suburb with the newest large-lot stock, which is where three-car front-entry and side-entry garages concentrate, while the 1970s to 1990s subdivisions are two-car attached, so that is the slab we are quoting against. A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty. That is the honest limit of patio and pool deck coating in Edmond, and we would rather say it here than on install day.
- Drive time from our shop
- 215 minutes
- Distance
- 185 miles
- Celina shop
- (903) 243-9525
- County
- Oklahoma County
- ZIP codes served
- 73003, 73012, 73013, 73025, 73034
Service coverage in Edmond: Oak Tree, downtown Edmond, Fairfax, Coffee Creek, Iron Horse Ranch, Kelly Lakes.
Everything we install in Edmond, OK →The spec
What you are buying in Edmond
- UV stability
- Will not yellow. Non-negotiable outdoors
- Slip resistance
- Anti-slip additive standard, not an upsell
- Surface temperature
- Lighter finishes stay usable barefoot in summer
- Warranty
- 10 years exterior
When this is the wrong call
A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.
Straight answers
Patio and Pool Deck Coating in Edmond: common questions
How much does patio and pool deck coating cost in Edmond?
Patio and Pool Deck Coating costs $8–$10 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does patio and pool deck coating involve in Edmond?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is patio and pool deck coating the wrong choice in Edmond?
A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.
What does the patio and pool deck coating specification include in Edmond?
UV stability: Will not yellow. Non-negotiable outdoors. Slip resistance: Anti-slip additive standard, not an upsell. Surface temperature: Lighter finishes stay usable barefoot in summer. Warranty: 10 years exterior.
Who is patio and pool deck coating best for in Edmond?
Pool surrounds; Covered and uncovered patios; Outdoor kitchens; Front porches and walkways. Slabbr assesses your surface and intended use before confirming the service.
How long does patio and pool deck coating take in Edmond?
Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is patio and pool deck coating warrantied in Edmond?
Exterior coatings carry a 10-year warranty. The written scope specifies coverage and exclusions.
Do you use epoxy for patio and pool deck coating in Edmond?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with patio and pool deck coating in Edmond?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is patio and pool deck coating available in Edmond?
Slabbr serves Edmond, including Oak Tree, downtown Edmond, Fairfax. ZIP codes in our service area include 73003, 73012, 73013, 73025, 73034. Contact our Celina team to confirm your address and appointment.
Who do I call about patio and pool deck coating in Edmond?
Contact Slabbr's Celina team at (903) 243-9525. Send your Edmond address, approximate area and photos so we can review the patio and pool deck coating scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Edmond.