Cleveland County, Oklahoma
Patio and Pool Deck Coating in Moore, OK
Patio and Pool Deck Coating in Moore, OK costs $8–$10 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. We are 200 minutes from Moore, running out of our shop in Celina.
$8–$10 per square foot in Moore; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Exterior coatings carry a 10-year warranty.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Matheus Bertelli / Pexels
200 minutes from the shop
Patios and pool decks on Moore slabs
In Moore this is patio and pool deck coatings. Housing here is overwhelmingly post-1965, with a significant rebuilt-since-2013 stratum, after the city went from 1,783 people in 1960 to 18,761 in 1970 and 35,063 by 1980, and garages are post-1970 two-car attached front-entry across most of the city, three-car in the newer south and east sections, and a documented difference from the rest of the metro: Moore's 2014 code requires wind-resistant garage doors on new residential construction, rated to 135 mph, so that is the slab we are quoting against. A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty. That is the honest limit of patio and pool deck coating in Moore, and we would rather say it here than on install day.
- Drive time from our shop
- 200 minutes
- Distance
- 168 miles
- Celina shop
- (903) 243-9525
- County
- Cleveland County
- ZIP codes served
- 73160, 73165, 73170
Service coverage in Moore: Highland Park, Brookside Addition, Skyview Terrace, Southmoor, Oak Ridge, Regency Park, Eastmoor, Plaza Towers.
Everything we install in Moore, OK →The spec
What you are buying in Moore
- UV stability
- Will not yellow. Non-negotiable outdoors
- Slip resistance
- Anti-slip additive standard, not an upsell
- Surface temperature
- Lighter finishes stay usable barefoot in summer
- Warranty
- 10 years exterior
When this is the wrong call
A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.
Straight answers
Patio and Pool Deck Coating in Moore: common questions
How much does patio and pool deck coating cost in Moore?
Patio and Pool Deck Coating costs $8–$10 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does patio and pool deck coating involve in Moore?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is patio and pool deck coating the wrong choice in Moore?
A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.
What does the patio and pool deck coating specification include in Moore?
UV stability: Will not yellow. Non-negotiable outdoors. Slip resistance: Anti-slip additive standard, not an upsell. Surface temperature: Lighter finishes stay usable barefoot in summer. Warranty: 10 years exterior.
Who is patio and pool deck coating best for in Moore?
Pool surrounds; Covered and uncovered patios; Outdoor kitchens; Front porches and walkways. Slabbr assesses your surface and intended use before confirming the service.
How long does patio and pool deck coating take in Moore?
Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is patio and pool deck coating warrantied in Moore?
Exterior coatings carry a 10-year warranty. The written scope specifies coverage and exclusions.
Do you use epoxy for patio and pool deck coating in Moore?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with patio and pool deck coating in Moore?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is patio and pool deck coating available in Moore?
Slabbr serves Moore, including Highland Park, Brookside Addition, Skyview Terrace. ZIP codes in our service area include 73160, 73165, 73170. Contact our Celina team to confirm your address and appointment.
Who do I call about patio and pool deck coating in Moore?
Contact Slabbr's Celina team at (903) 243-9525. Send your Moore address, approximate area and photos so we can review the patio and pool deck coating scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Moore.