Skip to content

TODAY ONLY: Save $250 when you call or get your quote by text

Ends midnight CT

Call (903) 243-9525
Slabbr

Collin County, Texas

Patio and Pool Deck Coating in Murphy, TX

Patio and Pool Deck Coating in Murphy, TX costs $8–$10 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Our crews reach Murphy in about 50 minutes, so a Murphy floor is a normal working day and not a road trip.

$8–$10 per square foot in Murphy; final scope after assessment

  • Coating preparation: diamond ground, never acid etched
  • Schedule and return to use confirmed with your scope
  • Exterior coatings carry a 10-year warranty.
  • Written fixed price, no sales visit needed

See your price

Two taps gets you the number. Nobody asks who you are first.

About 440 sq ft. The most common garage in Texas.. No sales visit required to see the number.

Photo: Matheus Bertelli / Pexels

50 minutes from the shop

Patios and pool decks on Murphy slabs

In Murphy this is patio and pool deck coatings. Housing here is an unusually tight 1999-2010 window in which the city went from farmland to essentially built out, and garages are three-car garages are the norm, frequently a two-plus-one split with separate doors, so that is the slab we are quoting against. A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty. That is the honest limit of patio and pool deck coating in Murphy, and we would rather say it here than on install day.

Drive time from our shop
50 minutes
Distance
30 miles
Celina shop
(903) 243-9525
County
Collin County
ZIP codes served
75094

Service coverage in Murphy: Rolling Ridge Estates, Bluff Creek Estates, Maxwell Creek North, Murphy Farms, Hunters Landing, Aviary, Windy Hill Farms.

Everything we install in Murphy, TX →

The spec

What you are buying in Murphy

UV stability
Will not yellow. Non-negotiable outdoors
Slip resistance
Anti-slip additive standard, not an upsell
Surface temperature
Lighter finishes stay usable barefoot in summer
Warranty
10 years exterior

When this is the wrong call

A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.

Straight answers

Patio and Pool Deck Coating in Murphy: common questions

How much does patio and pool deck coating cost in Murphy?

Patio and Pool Deck Coating costs $8–$10 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.

What does patio and pool deck coating involve in Murphy?

Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.

When is patio and pool deck coating the wrong choice in Murphy?

A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.

What does the patio and pool deck coating specification include in Murphy?

UV stability: Will not yellow. Non-negotiable outdoors. Slip resistance: Anti-slip additive standard, not an upsell. Surface temperature: Lighter finishes stay usable barefoot in summer. Warranty: 10 years exterior.

Who is patio and pool deck coating best for in Murphy?

Pool surrounds; Covered and uncovered patios; Outdoor kitchens; Front porches and walkways. Slabbr assesses your surface and intended use before confirming the service.

How long does patio and pool deck coating take in Murphy?

Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.

Is patio and pool deck coating warrantied in Murphy?

Exterior coatings carry a 10-year warranty. The written scope specifies coverage and exclusions.

Do you use epoxy for patio and pool deck coating in Murphy?

No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.

Can you replace an existing coating with patio and pool deck coating in Murphy?

Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.

Where is patio and pool deck coating available in Murphy?

Slabbr serves Murphy, including Rolling Ridge Estates, Bluff Creek Estates, Maxwell Creek North. ZIP codes in our service area include 75094. Contact our Celina team to confirm your address and appointment.

Who do I call about patio and pool deck coating in Murphy?

Contact Slabbr's Celina team at (903) 243-9525. Send your Murphy address, approximate area and photos so we can review the patio and pool deck coating scope.

See your number in about a minute

Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Murphy.

Call now