Dallas County, Texas
Patio and Pool Deck Coating in Garland, TX
Patio and Pool Deck Coating in Garland, TX costs $8–$10 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Garland sits about 45 miles from the Burleson shop, roughly 50 minutes with a trailer.
$8–$10 per square foot in Garland; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Exterior coatings carry a 10-year warranty.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Matheus Bertelli / Pexels
50 minutes from the shop
Patios and pool decks on Garland slabs
In Garland this is patio and pool deck coatings. Housing here is heavy 1960s-1980s build-out, with the Firewheel area on the northeast side added in the late 1980s and 1990s, and garages are two-car attached front-entry is the standard, with many 1960s single-car garages converted to living space, so that is the slab we are quoting against. A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty. That is the honest limit of patio and pool deck coating in Garland, and we would rather say it here than on install day.
- Drive time from our shop
- 50 minutes
- Distance
- 45 miles
- Burleson shop
- (817) 381-9385
- County
- Dallas County
- ZIP codes served
- 75040, 75041, 75042, 75043, 75044
Service coverage in Garland: Firewheel Estates, Camelot, Springpark Central, Castlewood, Hills at Firewheel, Crystal Lake, Villages of Valley Creek.
Everything we install in Garland, TX →The spec
What you are buying in Garland
- UV stability
- Will not yellow. Non-negotiable outdoors
- Slip resistance
- Anti-slip additive standard, not an upsell
- Surface temperature
- Lighter finishes stay usable barefoot in summer
- Warranty
- 10 years exterior
When this is the wrong call
A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.
Straight answers
Patio and Pool Deck Coating in Garland: common questions
How much does patio and pool deck coating cost in Garland?
Patio and Pool Deck Coating costs $8–$10 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does patio and pool deck coating involve in Garland?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is patio and pool deck coating the wrong choice in Garland?
A pool deck with standing water or a drainage problem needs the drainage fixed first. Coating over a slab that holds water traps the problem and voids the warranty.
What does the patio and pool deck coating specification include in Garland?
UV stability: Will not yellow. Non-negotiable outdoors. Slip resistance: Anti-slip additive standard, not an upsell. Surface temperature: Lighter finishes stay usable barefoot in summer. Warranty: 10 years exterior.
Who is patio and pool deck coating best for in Garland?
Pool surrounds; Covered and uncovered patios; Outdoor kitchens; Front porches and walkways. Slabbr assesses your surface and intended use before confirming the service.
How long does patio and pool deck coating take in Garland?
Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is patio and pool deck coating warrantied in Garland?
Exterior coatings carry a 10-year warranty. The written scope specifies coverage and exclusions.
Do you use epoxy for patio and pool deck coating in Garland?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with patio and pool deck coating in Garland?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is patio and pool deck coating available in Garland?
Slabbr serves Garland, including Firewheel Estates, Camelot, Springpark Central. ZIP codes in our service area include 75040, 75041, 75042, 75043, 75044. Contact our Burleson team to confirm your address and appointment.
Who do I call about patio and pool deck coating in Garland?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Garland address, approximate area and photos so we can review the patio and pool deck coating scope.
Patios and pool decks nearby
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Garland.