Tarrant County, Texas
Solid Color Epoxy Floor Alternative in Arlington, TX
Solid Color Epoxy in Arlington, TX costs $6 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. We are 28 minutes from Arlington, running out of our shop in Burleson.
$6 per square foot in Arlington; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
28 minutes from the shop
Solid color on Arlington slabs
In Arlington this is solid color floors. Housing here is heavy 1965-1985 build-out across the middle of the city, with south Arlington filling in 1990-2005 and Viridian adding new product on the north side, and garages are two-car attached dominates; 1960s sections often have narrow 18-foot-wide bays that limit vehicle fit, so that is the slab we are quoting against. A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice. That is the honest limit of solid color epoxy in Arlington, and we would rather say it here than on install day.
- Drive time from our shop
- 28 minutes
- Distance
- 22 miles
- Burleson shop
- (817) 381-9385
- County
- Tarrant County
- ZIP codes served
- 76001, 76002, 76006, 76012, 76013, 76017
Service coverage in Arlington: Viridian, Interlochen West, Woodland West Estates, Park Springs, River Legacy Estates, Rush Creek Ranch Estates, Fannin Farm West.
Everything we install in Arlington, TX →The spec
What you are buying in Arlington
- Colors
- Hundreds, matched to standard color decks
- Install time
- One day
- Maintenance
- Shows dust faster than flake, cleans just as easily
When this is the wrong call
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
Straight answers
Solid Color Epoxy in Arlington: common questions
How much does solid color epoxy cost in Arlington?
Solid Color Epoxy costs $6 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does solid color epoxy involve in Arlington?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is solid color epoxy the wrong choice in Arlington?
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
What does the solid color epoxy specification include in Arlington?
Colors: Hundreds, matched to standard color decks. Install time: One day. Maintenance: Shows dust faster than flake, cleans just as easily.
Who is solid color epoxy best for in Arlington?
Workshops and storage buildings; Rental properties; Commercial back-of-house; Anywhere a busy pattern would fight the space. Slabbr assesses your surface and intended use before confirming the service.
How long does solid color epoxy take in Arlington?
Install time: One day. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is solid color epoxy warrantied in Arlington?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for solid color epoxy in Arlington?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with solid color epoxy in Arlington?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is solid color epoxy available in Arlington?
Slabbr serves Arlington, including Viridian, Interlochen West, Woodland West Estates. ZIP codes in our service area include 76001, 76002, 76006, 76012, 76013, 76017. Contact our Burleson team to confirm your address and appointment.
Who do I call about solid color epoxy in Arlington?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Arlington address, approximate area and photos so we can review the solid color epoxy scope.
Solid color nearby
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Arlington.