Dallas County, Texas
Solid Color Epoxy Floor Alternative in Grand Prairie, TX
Solid Color Epoxy in Grand Prairie, TX costs $6 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Grand Prairie sits about 30 miles from the Burleson shop, roughly 35 minutes with a trailer.
$6 per square foot in Grand Prairie; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
35 minutes from the shop
Solid color on Grand Prairie slabs
In Grand Prairie this is solid color floors. Housing here is 1950s-70s in the original north end near Main Street, with the entire south end built out 1998-2015 around Joe Pool Lake, and garages are two-car front-entry in the south end master plans, one-car and carports common in the older north sections, so that is the slab we are quoting against. A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice. That is the honest limit of solid color epoxy in Grand Prairie, and we would rather say it here than on install day.
- Drive time from our shop
- 35 minutes
- Distance
- 30 miles
- Burleson shop
- (817) 381-9385
- County
- Dallas County
- ZIP codes served
- 75050, 75051, 75052, 75054
Service coverage in Grand Prairie: Mira Lagos, Grand Peninsula, Lake Parks, Westchester, Silverbrook, Coronado Forest, Kirby Creek Village.
Everything we install in Grand Prairie, TX →The spec
What you are buying in Grand Prairie
- Colors
- Hundreds, matched to standard color decks
- Install time
- One day
- Maintenance
- Shows dust faster than flake, cleans just as easily
When this is the wrong call
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
Straight answers
Solid Color Epoxy in Grand Prairie: common questions
How much does solid color epoxy cost in Grand Prairie?
Solid Color Epoxy costs $6 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does solid color epoxy involve in Grand Prairie?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is solid color epoxy the wrong choice in Grand Prairie?
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
What does the solid color epoxy specification include in Grand Prairie?
Colors: Hundreds, matched to standard color decks. Install time: One day. Maintenance: Shows dust faster than flake, cleans just as easily.
Who is solid color epoxy best for in Grand Prairie?
Workshops and storage buildings; Rental properties; Commercial back-of-house; Anywhere a busy pattern would fight the space. Slabbr assesses your surface and intended use before confirming the service.
How long does solid color epoxy take in Grand Prairie?
Install time: One day. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is solid color epoxy warrantied in Grand Prairie?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for solid color epoxy in Grand Prairie?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with solid color epoxy in Grand Prairie?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is solid color epoxy available in Grand Prairie?
Slabbr serves Grand Prairie, including Mira Lagos, Grand Peninsula, Lake Parks. ZIP codes in our service area include 75050, 75051, 75052, 75054. Contact our Burleson team to confirm your address and appointment.
Who do I call about solid color epoxy in Grand Prairie?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Grand Prairie address, approximate area and photos so we can review the solid color epoxy scope.
Solid color nearby
Also in Grand Prairie
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Grand Prairie.