Tarrant County, Texas
Solid Color Epoxy Floor Alternative in Crowley, TX
Solid Color Epoxy in Crowley, TX costs $6 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Our crews reach Crowley in about 10 minutes, so a Crowley floor is a normal working day and not a road trip.
$6 per square foot in Crowley; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
10 minutes from the shop
Solid color on Crowley slabs
In Crowley this is solid color floors. Housing here is predominantly 1995-2010 tract construction, with a small 1950s-60s original townsite near Main Street, and garages are two-car front-entry on 50 to 60 foot lots, with a handful of side-entry three-car plans in the ranch-name subdivisions, so that is the slab we are quoting against. A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice. That is the honest limit of solid color epoxy in Crowley, and we would rather say it here than on install day.
- Drive time from our shop
- 10 minutes
- Distance
- 5 miles
- Burleson shop
- (817) 381-9385
- County
- Tarrant County
- ZIP codes served
- 76036
Service coverage in Crowley: Carson Ranch, Deer Creek, Lasater Ranch, Rocky Creek Ranch, Crescent Springs Ranch, McDavid Springs, The Bridges.
Everything we install in Crowley, TX →The spec
What you are buying in Crowley
- Colors
- Hundreds, matched to standard color decks
- Install time
- One day
- Maintenance
- Shows dust faster than flake, cleans just as easily
When this is the wrong call
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
Straight answers
Solid Color Epoxy in Crowley: common questions
How much does solid color epoxy cost in Crowley?
Solid Color Epoxy costs $6 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does solid color epoxy involve in Crowley?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is solid color epoxy the wrong choice in Crowley?
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
What does the solid color epoxy specification include in Crowley?
Colors: Hundreds, matched to standard color decks. Install time: One day. Maintenance: Shows dust faster than flake, cleans just as easily.
Who is solid color epoxy best for in Crowley?
Workshops and storage buildings; Rental properties; Commercial back-of-house; Anywhere a busy pattern would fight the space. Slabbr assesses your surface and intended use before confirming the service.
How long does solid color epoxy take in Crowley?
Install time: One day. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is solid color epoxy warrantied in Crowley?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for solid color epoxy in Crowley?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with solid color epoxy in Crowley?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is solid color epoxy available in Crowley?
Slabbr serves Crowley, including Carson Ranch, Deer Creek, Lasater Ranch. ZIP codes in our service area include 76036. Contact our Burleson team to confirm your address and appointment.
Who do I call about solid color epoxy in Crowley?
Contact Slabbr's Burleson team at (817) 381-9385. Send your Crowley address, approximate area and photos so we can review the solid color epoxy scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Crowley.