Collin County, Texas
Solid Color Epoxy Floor Alternative in McKinney, TX
Solid Color Epoxy in McKinney, TX costs $6 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Our McKinney team serves McKinney and Collin, Rockwall, Dallas and Hunt counties.
$6 per square foot in McKinney; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
Your McKinney team
Solid color on McKinney slabs
In McKinney this is solid color floors. Housing here is a Victorian-era downtown square with Stonebridge Ranch driving 1990s-2000s growth and Trinity Falls and Painted Tree carrying it since 2015, and garages are two and three-car front-entry, with rear-entry alley garages throughout Tucker Hill and Craig Ranch, so that is the slab we are quoting against. A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice. That is the honest limit of solid color epoxy in McKinney, and we would rather say it here than on install day.
- Service area
- Collin, Rockwall, Dallas, Hunt counties
- McKinney shop
- (972) 265-9424
- County
- Collin County
- ZIP codes served
- 75069, 75070, 75071, 75072
Service coverage in McKinney: Stonebridge Ranch, Craig Ranch, Trinity Falls, Tucker Hill, Painted Tree, Aster Park.
Everything we install in McKinney, TX →The spec
What you are buying in McKinney
- Colors
- Hundreds, matched to standard color decks
- Install time
- One day
- Maintenance
- Shows dust faster than flake, cleans just as easily
When this is the wrong call
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
Straight answers
Solid Color Epoxy in McKinney: common questions
How much does solid color epoxy cost in McKinney?
Solid Color Epoxy costs $6 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does solid color epoxy involve in McKinney?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is solid color epoxy the wrong choice in McKinney?
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
What does the solid color epoxy specification include in McKinney?
Colors: Hundreds, matched to standard color decks. Install time: One day. Maintenance: Shows dust faster than flake, cleans just as easily.
Who is solid color epoxy best for in McKinney?
Workshops and storage buildings; Rental properties; Commercial back-of-house; Anywhere a busy pattern would fight the space. Slabbr assesses your surface and intended use before confirming the service.
How long does solid color epoxy take in McKinney?
Install time: One day. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is solid color epoxy warrantied in McKinney?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for solid color epoxy in McKinney?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with solid color epoxy in McKinney?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is solid color epoxy available in McKinney?
Slabbr serves McKinney, including Stonebridge Ranch, Craig Ranch, Trinity Falls. ZIP codes in our service area include 75069, 75070, 75071, 75072. Contact our McKinney team to confirm your address and appointment.
Who do I call about solid color epoxy in McKinney?
Contact Slabbr's McKinney team at (972) 265-9424. Send your McKinney address, approximate area and photos so we can review the solid color epoxy scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in McKinney.