Collin County, Texas
Solid Color Epoxy Floor Alternative in Prosper, TX
Solid Color Epoxy in Prosper, TX costs $6 per square foot. Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system. Timing is confirmed after a site assessment. Prosper sits about 8 miles from the Celina shop, roughly 20 minutes with a trailer.
$6 per square foot in Prosper; final scope after assessment
- Coating preparation: diamond ground, never acid etched
- Schedule and return to use confirmed with your scope
- Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years.
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Max Vakhtbovych / Pexels
20 minutes from the shop
Solid color on Prosper slabs
In Prosper this is solid color floors. Housing here is a handful of pre-2000 farmhouses with the town's entire residential base built from 2005 forward, and garages are three and four-car garages are routine, often with a separate oversized single bay, so that is the slab we are quoting against. A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice. That is the honest limit of solid color epoxy in Prosper, and we would rather say it here than on install day.
- Drive time from our shop
- 20 minutes
- Distance
- 8 miles
- Celina shop
- (903) 243-9525
- County
- Collin County
- ZIP codes served
- 75078
Service coverage in Prosper: Windsong Ranch, Star Trail, Whitley Place, Lakes of La Cima, Gentle Creek Estates, Legacy Gardens, Lilyana.
Everything we install in Prosper, TX →The spec
What you are buying in Prosper
- Colors
- Hundreds, matched to standard color decks
- Install time
- One day
- Maintenance
- Shows dust faster than flake, cleans just as easily
When this is the wrong call
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
Straight answers
Solid Color Epoxy in Prosper: common questions
How much does solid color epoxy cost in Prosper?
Solid Color Epoxy costs $6 per square foot with Slabbr. The measured area, surface condition and selected scope determine your written quote.
What does solid color epoxy involve in Prosper?
Slabbr prepares the concrete and installs polyaspartic base and top coats, not epoxy. The selected finish and written scope determine the complete system.
When is solid color epoxy the wrong choice in Prosper?
A solid floor telegraphs every low spot and every trowel line in the original pour. On a rough or wavy slab, flake is the more forgiving and better looking choice.
What does the solid color epoxy specification include in Prosper?
Colors: Hundreds, matched to standard color decks. Install time: One day. Maintenance: Shows dust faster than flake, cleans just as easily.
Who is solid color epoxy best for in Prosper?
Workshops and storage buildings; Rental properties; Commercial back-of-house; Anywhere a busy pattern would fight the space. Slabbr assesses your surface and intended use before confirming the service.
How long does solid color epoxy take in Prosper?
Install time: One day. Slabbr confirms the work schedule and return-to-use instructions after assessing the slab and selected finish.
Is solid color epoxy warrantied in Prosper?
Residential garage coatings carry a lifetime warranty; exterior coatings carry 10 years and commercial coatings 2 years. The written scope specifies coverage and exclusions.
Do you use epoxy for solid color epoxy in Prosper?
No. Slabbr uses polyaspartic base and top coats. If you found this service by searching for epoxy, ask us to compare the proposed polyaspartic system with your project's requirements.
Can you replace an existing coating with solid color epoxy in Prosper?
Slabbr assesses the existing coating and concrete before specifying removal and preparation. Existing coating removal is an additional $1.75 per square foot under the rate card, itemized in the quote.
Where is solid color epoxy available in Prosper?
Slabbr serves Prosper, including Windsong Ranch, Star Trail, Whitley Place. ZIP codes in our service area include 75078. Contact our Celina team to confirm your address and appointment.
Who do I call about solid color epoxy in Prosper?
Contact Slabbr's Celina team at (903) 243-9525. Send your Prosper address, approximate area and photos so we can review the solid color epoxy scope.
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Prosper.